Author Topic: 2020---->What did ya do today? (Read 91325 times)

Mad Max · « **Reply #380 on:** March 14, 2020, 05:10:33 PM »

I have that center one bue

flyonline · « **Reply #381 on:** March 14, 2020, 09:22:36 PM »

Quote from: Flem on March 13, 2020, 04:58:42 PM

Steve, I'm going to vac press it. I used to use a two sided tray and clamps, but it was not ideal. The vacuum is awesome. Not only does it press the crap out of it, but it eliminates any air voids.

Bue, I use this System Three Clear Coat. It's low viscosity, I think it's 400-600 CPS. It wets out the paper or fabric real fast and it has a long pot life.

Right on, I've done a few wet vac-bag layups for RC gliders, so I know the joys of a low viscosity resin and no air bubbles

A short term work colleague makes composite wooden bikes (as in wood plus composites) and uses some really high end/tech stuff like pre-preg boron and autoclaves and I've been given an invite to come have a look when he heard I was into wood bows and composites in general.

Errr, what's the hand on the bench doing?

Flem · « **Reply #382 on:** March 14, 2020, 10:44:26 PM »

Can I come along too? I'll bring the Hand of Fate

Forwardhandle · « **Reply #383 on:** March 15, 2020, 05:42:10 AM »

Flem you would like that didn't you design a snow bike a while back ?

Flem · « **Reply #384 on:** March 15, 2020, 09:58:33 AM »

Quote from: Forwardhandle on March 15, 2020, 05:42:10 AM

Flem you would like that didn't you design a snow bike a while back ?

I wish!
I would love to check out what Steve's pal is making. I've seen some composite bikes and Bamboo bikes, they are way cool. It sounds like he has some equipment. I covet an Autoclave.

Buemaker · « **Reply #385 on:** March 15, 2020, 11:06:15 AM »

There is many words in English that I do not know the meaning of.
When you say that an epoxy have a low viscosity, does that mean it is thin or easy to spread so a brush can be used?

monterey · « **Reply #386 on:** March 15, 2020, 12:14:21 PM »

Means it's thinner but doesn't define it by any particular scale.

Always thought your English was pretty good.

Flem · « **Reply #387 on:** March 15, 2020, 12:32:37 PM »

Most epoxy manufactures use a "centipiose" or CPS scale to measure viscosity or how a material will flow.
For reference, water has a CPS of 1, motor oil would be in the range of 200-500 CPS, EA-40 would be 100,000+CPS!!!

Shredd · « **Reply #388 on:** March 15, 2020, 02:45:42 PM »

Bue just replace the word viscosity with thick or thickness... So another wards high viscosity would be very thick as in honey and low viscosity would be less thick as in water...

Think I better you speak English than me...

Buemaker · « **Reply #389 on:** March 15, 2020, 05:35:10 PM »

Thanks, got it

Crooked Stic · « **Reply #390 on:** March 15, 2020, 05:44:15 PM »

the state of being thick, sticky, and semifluid in consistency, due to internal friction.
"cooling the fluid raises its viscosity"
a quantity expressing the magnitude of internal friction, as measured by the force per unit area resisting a flow in which parallel layers unit distance apart have unit speed relative to one another.
plural noun: viscosities
"silicone oils can be obtained with different viscosities"

Crooked Stic · « **Reply #391 on:** March 20, 2020, 06:59:54 AM »

Found this at Wal Mart. Prolly work great for tip overlays and be some quicker. Too large a quanity to experment with though. Anybody seen it in smaller containers ?

Flem · « **Reply #392 on:** March 20, 2020, 10:13:14 AM »

Thats decent quick epoxy. I've got it in a syringe. I think it came from my local Ace hardware.
It cures harder than some other fast set epoxy's.

Buemaker · « **Reply #393 on:** March 20, 2020, 01:10:45 PM »

How come I never thought to use this hole before cutting out riser.

Buemaker · « **Reply #394 on:** March 20, 2020, 01:13:09 PM »

Crooked Stic · « **Reply #395 on:** March 23, 2020, 08:35:28 AM »

Hmm neat idea Bue.
I posted this bow in the Pow Wow as KTBA donation. But finished except for a rubber sleeve on the grip is on order. anyhow some pics

Flem · « **Reply #396 on:** March 23, 2020, 01:00:14 PM »

Well thats pretty damn nice of you Stic

Do you have to lube up that rubber sleeve to get it on

Buemaker · « **Reply #397 on:** March 23, 2020, 01:12:11 PM »

Very good.

Forwardhandle · « **Reply #398 on:** March 23, 2020, 01:23:19 PM »

Looks great I have a soft spot for green bows

buddyb · « **Reply #399 on:** March 23, 2020, 04:18:14 PM »

Looks good Mike!

I like the green as well. One of these days I may have to build me a green one.

News:

Author Topic: 2020---->What did ya do today? (Read 91325 times)

Shredd

Users currently browsing this topic: