Author Topic: 2020---->What did ya do today? (Read 91289 times)

monterey · « **Reply #440 on:** April 07, 2020, 02:51:59 PM »

Quote from: Crooked Stic on April 07, 2020, 06:08:01 AM

So did the smooth on saturate the onion paper??

I can't say for certain. The SG did saturate the paper. I'm thinking that by keeping the paper narrow it won't be a structurally significant point. In addition, it hopefully will come in about 20# at 24 to 26 inches.

Crooked Stic · « **Reply #441 on:** April 08, 2020, 04:34:59 PM »

The next thing one piece FHLB 58 in. Oliveshade veneers with stable maple riser and the mystery block Ibeam.

kennym · « **Reply #442 on:** April 10, 2020, 09:58:30 PM »

Got some work done on Scrappy .

Crooked Stic · « **Reply #443 on:** April 10, 2020, 10:38:13 PM »

Nice Kenny.

4 point · « **Reply #444 on:** April 10, 2020, 10:53:00 PM »

That riser accent looks like a challenge to get lined up, at least it would be for me.

kennym · « **Reply #445 on:** April 11, 2020, 01:38:16 PM »

Travis , it’s not bad . I just go kinda slow, if you grind too far , then you’d have to put an accent in to bring it back to straight in line...

monterey · « **Reply #446 on:** April 11, 2020, 03:27:45 PM »

Getting close on the granddaughters bow. Just details left to do.

bigbob2 · « **Reply #447 on:** April 11, 2020, 09:36:51 PM »

Some very nice bows being made here!.Got a shot of three of my own recurve takedowns showing different approach in each that

I have made over time. Top bow is about 4 year old. just refinished it and made lighter limbs for it going down from 52# to 45#.

Shredd · « **Reply #448 on:** April 11, 2020, 11:01:21 PM »

Those look great Bob... Sweet looking bow Monty... I sure she is gonna Love it...

ztontonz · « **Reply #449 on:** April 11, 2020, 11:39:26 PM »

Nice looking bows!

bucknut · « **Reply #450 on:** April 12, 2020, 05:42:07 AM »

Nice bows Bob. I really like the wave in the one on the top. It has just enough of both woods to compliment each other very well.

Buemaker · « **Reply #451 on:** April 13, 2020, 06:28:39 AM »

Nice bows being made.

monterey · « **Reply #452 on:** April 17, 2020, 12:42:52 PM »

Put the final touches on the granddaughters bow. I'm pretty satisfied with it although every bow tells a story of what can be done better. I'm already working on another one for my other granddaughter.

Some pictures. The string is a bit short and is fine for tillering but it will get a new string and some arrows. That first picture of the nock was taken before final sanding.

Crooked Stic · « **Reply #453 on:** April 17, 2020, 06:04:40 PM »

Wow she should like that bow

I had a pretty old 6x48 sander that I sold. I have the big Grizzly that does better. But I took the money to Harbor Frieght today. Can do scarf joints now.

kennym · « **Reply #454 on:** April 17, 2020, 06:34:49 PM »

Looks great Monte!

Crookd , hows the table on that? Pretty solid?

Crooked Stic · « **Reply #455 on:** April 18, 2020, 11:18:25 AM »

Yeah Kenny. made of 3/4 plywood. 2x6 legs with two 1/4 bolts holding the top on. It has a bit of side wiggle but an angle brace would cure that. That sander box said 80 lbs. but more like 60 to me. Got rubber pads on each corner. pretty smooth running.

kennym · « **Reply #456 on:** April 18, 2020, 11:33:03 AM »

I meant the table on sander, lot of em are pretty floppy....

Crooked Stic · « **Reply #457 on:** April 18, 2020, 04:42:06 PM »

Let see if this will work

Buemaker · « **Reply #458 on:** April 20, 2020, 03:39:06 PM »

Is it velcro on the disc?

Crooked Stic · « **Reply #459 on:** April 24, 2020, 07:55:59 AM »

Disc are sticky back.

did this yesterday. This one has a claro walnut (stabilized) riser and KY. coffeebean veneers with a touch of brown stain.

News:

Author Topic: 2020---->What did ya do today? (Read 91289 times)

Shredd

Users currently browsing this topic: