Author Topic: 2020---->What did ya do today? (Read 91023 times)

Pat B · « **Reply #60 on:** January 11, 2020, 05:09:38 PM »

Hang tight down under, Steve. You guys are in our thoughts.

Roy from Pa · « **Reply #61 on:** January 12, 2020, 06:30:47 AM »

Hope things soon get better over there.

Buemaker · « **Reply #62 on:** January 12, 2020, 09:07:22 AM »

Bowyer’s gold dust. Scraping Osage today.

Crooked Stic · « **Reply #63 on:** January 12, 2020, 09:47:02 AM »

Hmmm what if a guy had a whole lot of that and cast it in clear resin for a riser block ?

Pat B · « **Reply #64 on:** January 12, 2020, 11:44:29 AM »

Makes excellent fire started if you have a wood stove or fireplace, Bue.

monterey · « **Reply #65 on:** January 12, 2020, 12:37:13 PM »

Quote from: Crooked Stic on January 12, 2020, 09:47:02 AM

Hmmm what if a guy had a whole lot of that and cast it in clear resin for a riser block ?

Interesting outside the box thought.

Crooked Stic · « **Reply #66 on:** January 12, 2020, 12:43:15 PM »

Thereis a guy on FB putting all kinds of stuff in resin and selling it for risers. Even seen one had a wrench cast in it.

Sent from my LM-X410.F using Tapatalk

Mark R · « **Reply #67 on:** January 12, 2020, 11:05:16 PM »

Hey Stic I know a Bowyer who's done that. Puts all kind of things in resin. I think it's the same outfit, Mike from Sauk Trail Archery, check them out.

Crooked Stic · « **Reply #68 on:** January 13, 2020, 07:19:42 AM »

Yeah it is not that hard to do. Need a pressure pot and compressor. The big cost is the resin. And I think they charge by the oz. of weight gain of the wood.

ztontonz · « **Reply #69 on:** January 13, 2020, 04:17:10 PM »

This past weekend I layed down all templates I will need for the take down handle.
Made a couple strings. While doing this, I was trying to find a way to easily cut the added material for the loops. And ended up just adding an extra nail on the right end. Pretty easy, I should have thought about this before

Flem · « **Reply #70 on:** January 14, 2020, 02:34:34 PM »

OK you guys are going to think I'm goofy(if you did not already), but I have a Woodpecker and Flicker problem. They are turning my siding into splinters! So I came up with this solution, I don't want to kill them, just scare the crap out of them. But in the process I discovered an excellent training tool. The motions involved are almost exactly like shooting a long or self bow. I'm thinking I will be out plinking to keep my shoulders in shape. Would be an excellent rehab or PT exercise with weaker bands.

Roy from Pa · « **Reply #71 on:** January 14, 2020, 03:37:11 PM »

[quote from flem] OK you guys are going to think I'm goofy [/quote]

Ah cough cough, ah well umm, I dunno:)

Yer gonna shoot the windows out Flem:)

Worked on bows Sunday, have a new guy making his very first bow.

Meet Jeremy..

Jerry laying out a z splice and Jeremy's bow material laying there also.

Osage belly and red elm core lam.

Flem · « **Reply #72 on:** January 14, 2020, 05:06:09 PM »

Damn, Jeremy must have finger tips of steel.

EvilDogBeast · « **Reply #73 on:** January 22, 2020, 10:45:17 PM »

Built a new workbench yesterday to hold this new curvy thing I made.

monterey · « **Reply #74 on:** January 23, 2020, 12:09:29 AM »

Is the form rubber band or topless?

EvilDogBeast · « **Reply #75 on:** January 23, 2020, 01:22:21 AM »

Going topless!

kennym · « **Reply #76 on:** January 23, 2020, 08:27:02 AM »

NICE!!

Autumnarcher · « **Reply #77 on:** January 23, 2020, 12:20:11 PM »

Like it!

Sent from my iPhone using Tapatalk

Crooked Stic · « **Reply #78 on:** January 23, 2020, 02:13:55 PM »

Ok so I made a new wrapping jig. And will prily try it out tomorrow.

Sent from my LM-X410.F using Tapatalk

Flem · « **Reply #79 on:** January 23, 2020, 05:04:04 PM »

Whats that green wood, Stic?

News:

Author Topic: 2020---->What did ya do today? (Read 91023 times)

Users currently browsing this topic: