Author Topic: 2020---->What did ya do today? (Read 91225 times)

Buemaker · « **Reply #240 on:** February 10, 2020, 12:45:58 PM »

Looking good Jeremy, did you use Unibond for handle piece also?

Crooked Stic · « **Reply #241 on:** February 10, 2020, 12:58:27 PM »

Makin those jig thingys makes you want to pull your hair out till you get them right.

ztontonz · « **Reply #242 on:** February 10, 2020, 02:01:42 PM »

Quote from: Crooked Stic on February 10, 2020, 12:58:27 PM

Makin those jig thingys makes you want to pull your hair out till you get them right.

You are right and I keep my fingers crossed and hope that it fits just right when I glue the first riser together.

But actually it wasn’t too bad getting this set done. I made both forms by hand, used a ¼ router bit to shape the counter-forms. Then reshaped the counter-forms on my oscillating sander which has a 1/8 offset. So theoretically I am left with a 1/8 gap for the accent strips.

Roy from Pa · « **Reply #243 on:** February 10, 2020, 09:46:25 PM »

Bue, yes unibond800 on riser.

Petrichor · « **Reply #244 on:** February 10, 2020, 09:52:30 PM »

Finished chasing today.

Flem · « **Reply #245 on:** February 10, 2020, 10:33:02 PM »

Looks like fun

You making bows for the kids too?

Petrichor · « **Reply #246 on:** February 10, 2020, 10:38:34 PM »

Quote from: Flem on February 10, 2020, 10:33:02 PM

Looks like fun You making bows for the kids too?

I definitely hope to. Right now I will settle for a working bow period. And then hopefully I will make them bows also.

bucknut · « **Reply #247 on:** February 12, 2020, 06:45:23 PM »

Went out after work today since the weather was crappy and cut and split 8 really nice Osage staves and 4 billets to try a TD.

Eric Krewson · « **Reply #248 on:** February 13, 2020, 10:21:27 AM »

Multitasking today, building a static osage recurve and a flintlock rifle, both are almost done.

Flem · « **Reply #249 on:** February 13, 2020, 11:08:34 AM »

Damn Eric! You are an ambitious dude. Which one do you think will be more effective?
Did you bore the barrel yourself? Is there anything you don't do?

kennym · « **Reply #250 on:** February 13, 2020, 01:20:22 PM »

Shoveled a little snow, then shoveled a little sawdust in shop, now making some spliced lams of curly maple and walnut with an s curve in middle and some accents.

Crooked Stic · « **Reply #251 on:** February 13, 2020, 02:10:35 PM »

Said a few bad words when I found out the $400 circuit board if junk on my pellet stove in the shop.

kennym · « **Reply #252 on:** February 13, 2020, 02:45:08 PM »

Man, Mike, That Stinks!!

Eric Krewson · « **Reply #253 on:** February 13, 2020, 03:39:37 PM »

That is my 5th flintlock build, much more effective than my selfbow, I bought the barrel ready to go.

Here is my turkey gun, 12ga, jug choked full, I made it as well, it was not a kit build;

Buemaker · « **Reply #254 on:** February 13, 2020, 03:55:45 PM »

That gun looks very nice.

Flem · « **Reply #255 on:** February 14, 2020, 01:47:52 PM »

Thats a beauty Eric. You got some skills

Crooked Stic · « **Reply #256 on:** February 15, 2020, 03:47:45 PM »

Okay folks here it is. The $400 piece for my pellet stove. How many of you see $400 in this this

Flem · « **Reply #257 on:** February 15, 2020, 04:15:10 PM »

I would have fixed that for $100., + the cost of a capaciitor

rockkiller · « **Reply #258 on:** February 15, 2020, 04:33:53 PM »

Mike....I had to replace that same controller twice. The first one was on warrant .Then with the second one I had to replace the blower because it wasn't compatible with the new controller. So I feel your pain

Crooked Stic · « **Reply #259 on:** February 15, 2020, 06:26:55 PM »

Al this one is suppose to be an upgrade for my stove. Thought I was gonna need a fan to $200 more. Had that been the case I would have looked into another stove.

So Flem how much total .....????

News:

Author Topic: 2020---->What did ya do today? (Read 91225 times)

Users currently browsing this topic: