Roughed out then straightened up an osage stave. Had some deflex, prop twist and tip alignment issues which thankfully were all in separate areas so I was able to straighten it out somewhat fairly easily. Enough to get it bending and to brace height and then re-straighten if needed.
The white box behind the stave is an asthma nebuliser I've converted to a vacuum pump, so hopefully will see some sucking duties at some stage.
Went and had a look at another house, has plenty of land so I'd be able to set up a full 3D course if I could be bothered, have a lifetimes supply of firewood and possibly harvest some timber for staves/boards.