2020---->What did ya do today?

[ztontonz]

Happy birthday to you!

[Minnesota Bill]

Happy Birthday Pat.
 

[Pat B]

Thanks guys. I'll take every one I can get from here on out and brag about it. 

[Mad Max]

Happy Birthday

[Flem]

Happy Birthday Pat!
And congratulations on surviving 7 decades
Thats a milestone I hope to make!

[Mad Max]

[Buemaker]

Gratulerer med dagen Pat. Pretty soon you will be older than me.

[Pat B]

Gosh, I hope not, Bue. It's already going too fast. 

[Flem]

That looks like a big a$$ overlay on the belly, Mark. Got a pic?

[Mad Max]

It's a .030 underlay 3-1/2" from the nock with a piece added over the nock area

[Buemaker]

Powerlam jig, very usefull when making these who taper to both sides.

[Carpdaddy]

 Continued to be teased by Kenny M!

[Flem]

I like that wishbone look of your underlay, Mark

Tony, it looks like Kenny sent you a giant Jolly Rancher

[Bvas]

Drank some beer and worked on a template for TD limbs.

Then had some more beers and figured I better stop working on the template before it gets all wonky.

So now I’m just drinking beers.

[wood carver 2]

I didn’t do much today, but I did cook up some stuffed venison backstrap medallions. Mmmmm!
I’ll take meat from a tender young doe over a buck any day. 😁
Dave.

[Shredd]

Drank some beer and worked on a template for TD limbs.

Then had some more beers and figured I better stop working on the template before it gets all wonky.

So now I’m just drinking beers.

                                                 That can happen...

I sanded some lams for a another bow...

[Eric Krewson]

When you get old a feeble you have to improvise. My camper battery was shot, in most cases you don't need one as I am always hooked up to power from my truck or at the campground.

It still bugged me that it was so weak so I decided to change it out. Now, with bad body parts I can no longer pick up a heavy battery up so I had to improvise a way to get it out of its awkward compartment.

I rigged up my deer dragamatic 2000 (my deer mover invention) to loop the mule tape over a gas line in the compartment, hooked to the battery and pulled it out of the battery box with my cordless drill. Next I put a ramp under the battery and slid it out of the compartment on the ramp.

I used a hand truck and 4 wheeler ramp to get it into the bed of my truck.

I reversed the procedure and put the new battery back in the compartment. I never picked up the battery during this swap out.

[monterey]

Very innovative.  We gotta keep on keepin on whatever ways we can and you are doing quite well at it.

[Bvas]

Worked on my form for TD limbs. Still gotta get dowels cut and installed for bands. This is my first go round with a TD.
I’m converting my one piece 58” D/R into a 62” three piece with a 14” riser. Fingers crossed, hopefully everything works out. 

[Mad Max]

Are you making the butt end long, to cut back to size after glue up

Lookin good

Got one sprayed this Morning