Author Topic: 2020---->What did ya do today? (Read 91121 times)

Mad Max · « **Reply #1120 on:** December 13, 2020, 05:50:47 PM »

Cut/glue some Horn/Osage/Bocote for tip overlays.
Cut/glue some Osage for Tip Belly underlays

Cut the shelf in and got some of the riser Profile sanded

mmattockx · « **Reply #1121 on:** December 13, 2020, 06:48:37 PM »

Quote from: Mad Max on December 13, 2020, 05:50:47 PM

Cut the shelf in and got some of the riser Profile sanded

Looks good, but you cut the shelf on the wrong side. That's never going to work for me.

Ever have any issues with the fades popping loose on a design like that?

I spent some time freezing in the woodshop this afternoon (-16C with a brutal wind chill out, winter has returned with a vengeance). Sorted out a problem I was having with my thickness sander tapering the edge of the lam on one side (the issue was dust build up under the sanding paper wrapped on the drum) and made some jig parts for my glue up form. Along with the experimental Perry Reflex bow I am trying an adjustable form design that will allow me to make most any side profile I want on a glue up without having to endlessly make plywood forms that cost $$$ and only make one shape. If it works out I will post pics and details. If not it may never be spoken of again...

Mark

Mad Max · « **Reply #1122 on:** December 13, 2020, 07:00:50 PM »

It will hold
The fades are inside the core.
all of these can be made on 1 form

Mad Max · « **Reply #1123 on:** December 13, 2020, 10:03:34 PM »

I've had this 6" rule for many years and I use it for sanding too. 3/4"wide

Shredd · « **Reply #1124 on:** December 14, 2020, 10:49:23 AM »

I do something similar but I use a hacksaw blade with the teeth ground off... I also take a used 6" disc of sandpaper with a sticky back, cut it to size and fold it over the hacksaw blade and stick it to it... Now when I fold sandpaper over the blade it does not want to slide around...

Roy from Pa · « **Reply #1125 on:** December 14, 2020, 02:14:40 PM »

Ya got a crack in yer hole...

Mad Max · « **Reply #1126 on:** December 14, 2020, 03:29:31 PM »

Pat B · « **Reply #1127 on:** December 14, 2020, 06:34:55 PM »

...or is it a hole in his crack.

Roy from Pa · « **Reply #1128 on:** December 14, 2020, 07:05:45 PM »

Now we know what's been wrong wif him:)

Mad Max · « **Reply #1129 on:** December 15, 2020, 03:59:51 PM »

I want my tip belly underlays to be flat grain so I got a small piece of scrap

Sand on the edge sander and resaw cut and sanded some veneers to .025

Cut some Horn/Osage/Bocote for tip overlays

In the oven, I leave the door cracked open for about 100/120* for 6 hours and the next day I start back on it

Roy from Pa · « **Reply #1130 on:** December 15, 2020, 04:26:36 PM »

Crooked Stic · « **Reply #1131 on:** December 18, 2020, 05:01:20 PM »

Getting closer on my FHLB. Needs to lose about 3lbs. Got some of the TB sealer on the riser today. Not that I planned it but the green glass looks neat peeking out in the throat.

Mad Max · « **Reply #1132 on:** December 18, 2020, 05:11:07 PM »

Nice Stic

Roy from Pa · « **Reply #1133 on:** December 18, 2020, 06:29:28 PM »

Very nice Mike..

KellyG · « **Reply #1134 on:** December 19, 2020, 04:34:50 PM »

No bows made for me this year. I did make some new broadheads. My earlier ones the tangs just does not secure them in the arrow shart very well. So I doubled their lengths from .5" to 1", so the whole head is about 3" long. the tang is 1" by .25" give or take. I found that not only do they really get secured better they added weight has tamed some of the arrows better. I am using old circular saw blades.

Stagmitis · « **Reply #1135 on:** December 19, 2020, 04:36:19 PM »

Nice!

Buemaker · « **Reply #1136 on:** December 19, 2020, 05:50:28 PM »

Looking good Stic

Flem · « **Reply #1137 on:** December 19, 2020, 07:01:02 PM »

That looks nice Stic! Has a retro 60' look, especially with the green in the throat

Mad Max · « **Reply #1138 on:** December 22, 2020, 11:11:19 AM »

Somebody did sompin Yesterday

I put some Tru-oil on wif no pictures Roy

Flem · « **Reply #1139 on:** December 22, 2020, 11:24:03 AM »

Quote from: Mad Max on December 22, 2020, 11:11:19 AM

Somebody did sompin Yesterday
I put some Tru-oil on wif no pictures Roy

Now you can watch it dry. At least you got something to do the rest of the day and tomorrow and the next day

News:

Author Topic: 2020---->What did ya do today? (Read 91121 times)

Shredd

Users currently browsing this topic: