Author Topic: 2020 Bow Swap Progress Thread (Read 53218 times)

skeaterbait · « **Reply #60 on:** February 13, 2020, 03:15:36 PM »

Bue, that topo map you got there looks very interesting.

ztontonz · « **Reply #61 on:** February 14, 2020, 11:59:34 AM »

Quote from: skeaterbait on February 13, 2020, 03:15:36 PM

Bue, that topo map you got there looks very interesting.

ztontonz · « **Reply #62 on:** February 14, 2020, 12:00:15 PM »

Quote from: skeaterbait on February 13, 2020, 03:15:36 PM

Bue, that topo map you got there looks very interesting.

BO-R · « **Reply #63 on:** February 14, 2020, 04:18:44 PM »

Getting some things together for my victim,,,

kennym · « **Reply #64 on:** February 14, 2020, 05:51:27 PM »

I did some drilling and threaded inserts today.

skeaterbait · « **Reply #65 on:** February 14, 2020, 07:42:07 PM »

I finally got my Cactus Juice and a silicone sheet to make a new seal for the chamber so the Tamarind is finally marinating in the juice.

4 point · « **Reply #66 on:** February 14, 2020, 10:02:40 PM »

Have all my pieces made. Getting close to being ready for glue.

kennym · « **Reply #67 on:** February 15, 2020, 11:14:22 AM »

That’s gonna be nice!!

kennym · « **Reply #68 on:** February 15, 2020, 11:15:06 AM »

kennym · « **Reply #69 on:** February 15, 2020, 11:20:00 AM »

Ever have pins push back up from air compressed and sealed by glue?

kennym · « **Reply #70 on:** February 15, 2020, 11:21:20 AM »

Mad Max · « **Reply #71 on:** February 15, 2020, 12:39:32 PM »

Sand a flat on the side of the dowel pin

kennym · « **Reply #72 on:** February 15, 2020, 12:47:27 PM »

Could do that Mark! I grind a divot on each side to keep pin in riser. Have had a couple pull out with limb …

First time I've put tape on the pad before gluing, kinda like it.

kennym · « **Reply #73 on:** February 15, 2020, 12:49:10 PM »

Limbs are mounted, no pics , this is a top secret junkyard dawg …

4 point · « **Reply #74 on:** February 16, 2020, 09:23:36 PM »

Kenny, from what you have showed us that's gonna be a good look'n junk yard dawg!

buddyb · « **Reply #75 on:** February 16, 2020, 09:33:49 PM »

Kenny, I file a small grove on all 4 corners of the pin and then glue up with Smooth-on MT-13 epoxy.

Crooked Stic · « **Reply #76 on:** February 17, 2020, 04:34:12 PM »

For the pin fit I try to get the limb holes not wiggly loose but loose enough they dont hang up. And just enough pin sticking out to locate the limb. Prolly no more than 1/3rd of the pin sticking out.

Ok victim I have a block here. Blue stable maple and charcoal AW. So I need some input on veneers. I have this blue angel AW or sumpin else??

Buemaker · « **Reply #77 on:** February 17, 2020, 05:04:47 PM »

Looks good together.

TradBowyer · « **Reply #78 on:** February 17, 2020, 09:42:10 PM »

i agree...that is a wild looking bow so go for it all....i like the lams

4 point · « **Reply #79 on:** February 17, 2020, 10:21:29 PM »

Looks like it should make a good look'n combo!

News:

Author Topic: 2020 Bow Swap Progress Thread (Read 53218 times)

Users currently browsing this topic: