Awesome, what a great bow!
I'm tracking 46% complete plus one in the mail still.
I had the brilliant idea of filling the grain in the riser with a brushed on coat of T-bird, full strength (no thinner). It wasn't super pretty, but I didn't care I was just going to fill the grain and sand it back off. I was doing a second bow at the same time for myself that I started last December and when I went to sand it down after 48 hours, things didn't go as planned. It sanded ok on the surface like you would want between coats, but it was not fully cured (they say 7 days or something) and so in areas I got back down to bare wood it didn't feather out nice but left a slight edge. Not sure how it will look when recoated, so I left for a couple more days and I'm going back today to revisit the sanding and see if I can get the bow sprayed today. Which means I can hopefully support shipping by Friday. At this point if it's still a bit difficult I may just fully sand every bit of it off and start over. Ugh...
The good news is that with some finish on it the bow looks amazing, the woods really pop.