Author Topic: 🤬🤬🤬🤬 (Read 3207 times)

Dannon · « **on:** August 30, 2020, 09:43:44 PM »

Well they say the best lessons are expensive lessons. I built a new form and this was to be my first bow off this form. Although I checked and double checked I still ended up reversing my belly taper.

I was really looking forward to finishing this bow out. Who doesn’t love Osage?

Mad Max · « **Reply #1 on:** August 30, 2020, 10:18:16 PM »

I write butt end on all lams, left and right too

Mad Max · « **Reply #2 on:** August 30, 2020, 10:57:17 PM »

you can save that riser with some work, very careful work at the fades

Shredd · « **Reply #3 on:** August 31, 2020, 12:57:41 AM »

Sorry Bro... I feel your pain... Double triple, check and make a checklist... Label the ends of your lams...

Buemaker · « **Reply #4 on:** August 31, 2020, 03:38:06 AM »

Some bows have been made with reverse tapers, why not put a string on it and see how it bends?
21 century longbows was made like that and according to Norbert Mullaney an excellent one.

Dannon · « **Reply #5 on:** August 31, 2020, 06:54:38 AM »

KennyM and Mad Max suggested saving the riser. I think I’m going to try that and just start over

Roy from Pa · « **Reply #6 on:** August 31, 2020, 07:16:27 AM »

Man that sucks..

Flem · « **Reply #7 on:** August 31, 2020, 12:24:40 PM »

That does suck!

No way to make it work? Looks to be a pain in the a$$ either way.
Would not hurt to shape the limbs little and see how they bend, if your going to trash them anyways.

Mad Max · « **Reply #8 on:** August 31, 2020, 12:29:37 PM »

Quote from: Flem on August 31, 2020, 12:24:40 PM

That does suck! No way to make it work? Looks to be a pain in the a$$ either way.
Would not hurt to shape the limbs little and see how they bend, if your going to trash them anyways.

Could be a new discovery that shoots 250 feet per second and always hits the bulls eye, or not

Pat B · « **Reply #9 on:** August 31, 2020, 07:15:50 PM »

My Treadway mild R/D has reversed tapered lams in the limbs.

Bvas · « **Reply #10 on:** August 31, 2020, 07:36:58 PM »

What taper rate is the belly lam?

And what is the back lam? Taper also?

Dannon · « **Reply #11 on:** August 31, 2020, 09:02:41 PM »

Bvas, the back taper is .002 and the belly is .001

Bvas · « **Reply #12 on:** August 31, 2020, 09:36:55 PM »

Well heck, ya still got .001 taper overall.
I’m with the others. I’d profile the limbs and see what ya got before stripping them off. Maybe start your profile a little further off the fades to help stiffen the inner limbs.

Bvas · « **Reply #13 on:** August 31, 2020, 09:38:22 PM »

That’s assuming ya screwed up both belly lams.

Dannon · « **Reply #14 on:** August 31, 2020, 10:01:04 PM »

Lol! No only one of the belly lams are screwed up

Bvas · « **Reply #15 on:** August 31, 2020, 10:14:51 PM »

Well....,In that case.....,

Buemaker · « **Reply #16 on:** September 01, 2020, 06:45:41 AM »

Oops, I see, not much to do then.

Flem · « **Reply #17 on:** September 01, 2020, 09:39:29 AM »

Quote from: Dannon on August 31, 2020, 10:01:04 PM

Lol! No only one of the belly lams are screwed up

If you are going to screw up, at least do a complete job of it

Longcruise · « **Reply #18 on:** September 01, 2020, 03:26:51 PM »

Time to go into riser salvation mode!

Dannon · « **Reply #19 on:** September 01, 2020, 06:02:03 PM »

Quote from: Longcruise on September 01, 2020, 03:26:51 PM

Time to go into riser salvation mode!

Yep, that’s what I’ll be doing this weekend!

News:

Author Topic: 🤬🤬🤬🤬 (Read 3207 times)

Shredd

Users currently browsing this topic: