glue for woody weights

[rainman]

What glue does everyone use to glue the broadheads to the Woody Weights?  I get ferrul tite for the WW to the shaft just wondering if that will work for metal to metal.

[M60gunner]

It should work. All we used for ever gluing inserts into aluminum shafts. Also for gluing glue on BH’s to metal inserts. Only issue Ferrel Tite had was becoming brittle after a couple years.

[rainman]

Thanks

[Phrogdrvr]

I have had good luck with Ferrel Tite for the WW to shaft, then two part devcon epoxy for the head to WW.

[gordydog]

I use Kimsha, it doesn't become brittle.

[NY Yankee]

I ran out of Ferrule -Tite one day and went to the hardware store. Found a bag of Gorilla Glue glue sticks for glue guns. I use it the same way as Ferrule-Tite and it works great. Ill never have to buy Ferrule-Tite again. It melts at a low heat and hardens quickly to a firm, tough, rubbery consistency. Not flexing but not hard either.

[rainman]

James I will try that when my ferrule tite runs out.  That is what I used and it worked great so far.

Semper Fi
Dan