Author Topic: Snakey Osage 2020 (Read 13028 times)

Pat B · « **Reply #60 on:** October 31, 2020, 08:36:01 AM »

Two turnbuckles.

Roy from Pa · « **Reply #61 on:** October 31, 2020, 08:42:57 AM »

Yup he must really need help.

Mad Max · « **Reply #62 on:** October 31, 2020, 08:52:20 AM »

You

guy's

Roy from Pa · « **Reply #63 on:** October 31, 2020, 08:53:35 AM »

Buemaker · « **Reply #64 on:** October 31, 2020, 09:47:35 AM »

Wool yarn in the turnbuckles work as silencers.

flyonline · « **Reply #65 on:** November 01, 2020, 02:55:54 AM »

And here it was me thinking it was for adjusting nocking point height

Roy from Pa · « **Reply #66 on:** November 01, 2020, 05:11:14 AM »

Could be it's amber dextrous.

Mad Max · « **Reply #67 on:** November 01, 2020, 09:31:10 AM »

shame shame shame

At least it doesn't have any string follow YET

Roy from Pa · « **Reply #68 on:** November 01, 2020, 12:56:26 PM »

September 29, 2020, 06:23:03 PM

Been a month and ya hain't flinging arrows?

WTH....

Mad Max · « **Reply #69 on:** November 01, 2020, 01:01:30 PM »

One more time roy with the ellipse

Roy from Pa · « **Reply #70 on:** November 01, 2020, 02:53:57 PM »

Pat B · « **Reply #71 on:** November 01, 2020, 03:34:43 PM »

Can you get a little bend above and below the handle, just off the fades. It looks quite stiff there.

Mad Max · « **Reply #72 on:** November 01, 2020, 03:51:40 PM »

Quote from: Pat B on November 01, 2020, 03:34:43 PM

Can you get a little bend above and below the handle, just off the fades. It looks quite stiff there.

It’s bending all the way to the fades

Need to work on the left side

Bigger ellipse roy

Roy from Pa · « **Reply #73 on:** November 01, 2020, 04:49:43 PM »

You sure the bow is sitting level in the cradle?
Looks high on the right side.

Your picture is small vertical wise.

Attach it with the option at the bottom instead of how you are doing it.

Mad Max · « **Reply #74 on:** November 01, 2020, 06:42:40 PM »

the tips are level at the top of the tiller tree plywood

Is this enough to down here?
Pain in the butt to tiller, It's been looking good up to now.
The middle of the bow does not matter, The tip timing is what we are doing
Thanks Roy

Pat B · « **Reply #75 on:** November 01, 2020, 06:59:13 PM »

Have you picked top/bottom limb yet?

Mad Max · « **Reply #76 on:** November 01, 2020, 07:17:53 PM »

It's kind of going back a forth a couple times.
I'm sliding the handle left or right while I pull the rope.
So not yet.
I got a new picture roy

Roy from Pa · « **Reply #77 on:** November 01, 2020, 07:47:04 PM »

I level the riser from fade to fade and don't worry where the tips are.

The tips/limbs are going to change while tillering.

I tiller for equal limb timing by keeping my tree pull rope tracking the vertical line on the wall which is aligned to where my middle finger will be on the bow string.

I could care less where the tips are or if the tiller is positive or negative.

My bows shoot great and are whisper quiet.

Mad Max · « **Reply #78 on:** November 01, 2020, 08:01:59 PM »

Out past the 2 humps on each side of the riser it's basically flat, look at the unbraced picture Reply # 74.
I went threw this at the Tennessee classic with the guy's there.

this bow has no level, the first thing I did when I laid it on the tree was shim the riser to get the tips level and glued on a shim, I'm not tillering the riser I'm getting the limbs some what bending the same and watching the tips.
Remember, this is a stick

Trust me, It's the only way.
The ellipse is helping me alot.

Roy from Pa · « **Reply #79 on:** November 01, 2020, 08:36:22 PM »

I know it's a stickbow, that's all I make.

Do it your way.

I'll do the pictures for ya.

News:

Author Topic: Snakey Osage 2020 (Read 13028 times)

Users currently browsing this topic: