Author Topic: FHLB build Mostly done now!! (Read 22866 times)

Carpdaddy · « **Reply #80 on:** October 30, 2020, 07:27:29 AM »

:laughing:Roy

Looking good Kenny!

Buemaker · « **Reply #81 on:** October 30, 2020, 08:32:09 AM »

New riser? Soft or hard wood?

kennym · « **Reply #82 on:** November 03, 2020, 11:50:31 AM »

Glue up today

Roy from Pa · « **Reply #83 on:** November 03, 2020, 11:54:42 AM »

kennym · « **Reply #84 on:** November 03, 2020, 12:53:34 PM »

The glue, ea40 seems to be non critical on ratio since you can mix equal or 2/1 so anymore I just use a bit less hardener and go with it...

Keep everything clean and mix well then mix again. You have time and neither component will hold a bow together by itself .

kennym · « **Reply #85 on:** November 03, 2020, 12:58:28 PM »

Other accessories laid out, bout go time...

kennym · « **Reply #86 on:** November 03, 2020, 01:02:05 PM »

That's weird, I only laid that stuff out once...

Mad Max · « **Reply #87 on:** November 03, 2020, 02:31:30 PM »

You need a impact gun to build a bow

kennym · « **Reply #88 on:** November 03, 2020, 02:33:41 PM »

I like you guys but not nuff to take pics of the glue spreading !

Here I have the stuff on the form and the zip Ty’s in place, nice thing about them is you can tighten them slowly and the riser moves away from the one you pull tighter so it’s easy to center it up on the form .

kennym · « **Reply #89 on:** November 03, 2020, 02:34:14 PM »

Yep easier than handles on the bolts....

kennym · « **Reply #90 on:** November 03, 2020, 02:38:42 PM »

A bit too much glue , but like a weapon I’d rather have it and not need it than need it and not have it....

And last one for today, if you wipe the glue down between plastic you can tear most of it off the blank and grind less...

Roy from Pa · « **Reply #91 on:** November 03, 2020, 03:10:07 PM »

Mad Max · « **Reply #92 on:** November 03, 2020, 05:16:05 PM »

looks like you could break those fades off

For a pro like you, you don't need no stinkin metal strip on top

ztontonz · « **Reply #93 on:** November 03, 2020, 05:16:52 PM »

Looking good Kenny

kennym · « **Reply #94 on:** November 03, 2020, 07:16:35 PM »

Ha Mark ! Just another test !

Mainly cuz I forgot the damn thing !

Roy from Pa · « **Reply #95 on:** November 03, 2020, 07:54:37 PM »

skeaterbait · « **Reply #96 on:** November 03, 2020, 08:02:13 PM »

Quote from: kennym on November 03, 2020, 07:16:35 PM

Ha Mark ! Just another test !

Mainly cuz I forgot the damn thing !

My experience is that it leaves a lovely fire hose pattern on your bow.

Buemaker · « **Reply #97 on:** November 04, 2020, 07:36:05 AM »

I forgot one time to put the metal pressure strip on and found it more difficult to tear the tape off as it had a hose pattern, but only in the tape. When using zip ties I pump it up to about 20-30 pounds and let it sit for a while then pull them out. With a metal strip I once left them in place until glue had cured with no ill effects. Without a metal strip I would think you would get som marks across.

Flem · « **Reply #98 on:** November 04, 2020, 10:03:53 AM »

Awesome details. I think somebody needs to do a full length video of spreading EA-40 on a 5 lam blank.
I know just the guy for the job

It's not me!

Roy from Pa · « **Reply #99 on:** November 04, 2020, 04:52:19 PM »

I'll not do it:)

News:

Author Topic: FHLB build Mostly done now!! (Read 22866 times)

Users currently browsing this topic: