Author Topic: Palmer Extreme 4 blade? (Read 4062 times)

Iowabowhunter · « **on:** November 19, 2020, 08:31:03 PM »

Wondering who has used these, and what # would be necessary to push on through an Iowa whitetail?

I like the looks of the Zwickey Delta 4 blade and will likely shoot those as well, but im sharpening challenged-if i can't use the KME system thats kind of a turnoff for me.

buckeyebowhunter · « **Reply #1 on:** November 19, 2020, 08:45:57 PM »

That palmer extreme looks like a muzzy phantom to me. I always had good luck with the phantoms but never tried to resharpen them.

I doubt you'll be able to sharpen those deltas on the KME because of their convex. I always had to sharpen the 2 blade deltas free hand. But they're good heads

Dave Lay · « **Reply #2 on:** November 19, 2020, 11:17:05 PM »

They are made by muzzy but a little wider than a phantom at 1 1/2” I believe. If I could get by with a 160 gr head I think it would be a good choice, the bleeders are removable to ease sharpening . I wish they would make a 200 gr

Mint · « **Reply #3 on:** November 23, 2020, 06:36:13 PM »

I shoot a 47lb Palmer recurve @26" with heritage 90 shafts cut to 28" and my draw is 26". I've taken a few whitetails and never had a problem with the Palmer Extreme Cut heads. I thought i might have a had a problem with penetration on a boar hog I shot last year but I'm pretty sure i hit the scapula. On all the deer i had pass throughs or lodged in the off shoulder.

hybridbow hunter · « **Reply #4 on:** November 24, 2020, 04:02:53 PM »

I got some packs from 3 rivers.
I had 2 negative side after shooting them for pre hunt practice in broadhead target (rinehart 18 side) side first they don t hold to much hard impact and alloy ferule bend quite easily and second more serious, some of them will quickly get a little play between ferule tip notch and the blade. That make noise and doesn't give confidence in the toughness. I resold all of them as I couldn't stand with a broadhead with a play in the blade. Maybe it was quality control or my batch that wasn't good but that s my short experience. There’s several MUCH better choice if you look for a wide cutting BH

Iowabowhunter · « **Reply #5 on:** November 24, 2020, 09:18:18 PM »

Hybrid-which 4 blade would you be referring to thats much better?

hybridbow hunter · « **Reply #6 on:** November 25, 2020, 01:42:36 PM »

Centaur broadheads ( Jim Neave) makes much tougher WIDE BH but 2 blades. I use the 150 gr shortmag with 75 gr steel adaptator.
If you want quite ready to hunt BH out of the box 4 blades close to the palmer's weight wise, though little less wide, the 150 gr kudu point are really tough and now can be upgraded with bleeders. (4 blade) Price is fair as well for the quality and sharpness. They are curiously underrated in the traditional bow community but they are really tough, fly perfectly ( they are spined to be shot out of the fastest compound as well) and penetrate insanely out of traditional gear and don't make noise as all unvented broadheads. A hunting mate of mine killed 12 animals with the same kudu point 150 gr BH. They are made in the US.
I shoot heavy point in the 200-225 gr on 100 gr insert so they are too light for my taste but those would be my choice if I had to shoot a BH in that range of weight.

stik&string · « **Reply #7 on:** November 28, 2020, 10:29:11 AM »

I shot the muzzy phantom ss for years. They are 220 grain with the bleeders. Unfortunately I put my last one through a deer two seasons ago and hit a rock on the other side. I wish I would have snapped up a bunch of them before they discontinued them. These look very similar to the wide SS, that I used to shoot. I've switched to 4 blade deltas and although hand sharpening can be a pain, they have proven deadly to me and have been for others for many years.

Sam McMichael · « **Reply #8 on:** November 28, 2020, 10:34:47 AM »

Viva la Razorhead!

Iowabowhunter · « **Reply #9 on:** December 09, 2020, 05:54:40 PM »

Anybody else have luck with the Palmers?

Terry Green · « **Reply #10 on:** December 09, 2020, 07:10:20 PM »

Stick with Z4s... a proven constant.

Iowabowhunter · « **Reply #11 on:** December 09, 2020, 07:47:57 PM »

Quote from: Terry Green on December 09, 2020, 07:10:20 PM

Stick with Z4s... a proven constant.

I want to shoot them Terry, just concerned that a lot of vendors are sold out, plus I cant use my KME to sharpen them and I'm pretty well useless without that sharpener

Terry Green · « **Reply #12 on:** December 09, 2020, 08:03:35 PM »

Are they sold out of Delta 4 blades?

Have you not watched my Z sharpening vids?

Iowabowhunter · « **Reply #13 on:** December 09, 2020, 08:11:50 PM »

Quote from: Terry Green on December 09, 2020, 08:03:35 PM

Are they sold out of Delta 4 blades?

Have you not watched my Z sharpening vids?

3 rivers website says sold out and not available for backorder. I do have 3 or 4 at the house but they need mounted on adaptors. Id rather have glue on so I can make sure they spin properly.

I have not ill check it out

ESP · « **Reply #14 on:** December 09, 2020, 08:37:42 PM »

I’ve searched high and low and found a few Z4 before deer season .

stik&string · « **Reply #15 on:** December 09, 2020, 09:08:23 PM »

I have found a few places have glue on, screw-ins have been tough to find for a while.

Terry Green · « **Reply #16 on:** December 10, 2020, 07:42:21 AM »

All are glue ons... just need adapters....

1st it was No Mercys that were out, now the deltas?

Something is seriously amiss.

Iowabowhunter · « **Reply #17 on:** December 10, 2020, 07:59:17 AM »

Quote from: Terry Green on December 10, 2020, 07:42:21 AM

All are glue ons... just need adapters....

1st it was No Mercys that were out, now the deltas?

Something is seriously amiss.

I reached out to Zwickey and a few of the sponsors, hoping for good news.

Iowabowhunter · « **Reply #18 on:** December 10, 2020, 11:58:17 AM »

Hey Terry-

Heard back from Joyce in the office, had some die issues they are working out.

She is hoping to have some back in supply in 3 weeks to a month!

ESP · « **Reply #19 on:** December 10, 2020, 03:50:09 PM »

Thank you Iowa


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: Palmer Extreme 4 blade? (Read 4062 times)

Users currently browsing this topic: