Author Topic: Making arrowshafts (Read 3970 times)

Buemaker · « **on:** December 05, 2020, 03:39:29 PM »

I hope a joke can be allowed in these depressing Corona times. This is how we make arrowshafts in Norway.

Bvas · « **Reply #1 on:** December 05, 2020, 04:09:29 PM »

That’s great Bue.

Mad Max · « **Reply #2 on:** December 05, 2020, 04:09:44 PM »

How many blocks of wood per dozen

Crooked Stic · « **Reply #3 on:** December 05, 2020, 04:25:33 PM »

What cha season them with.

Buemaker · « **Reply #4 on:** December 05, 2020, 04:56:44 PM »

The blocks must be without knots otherwise the knots are transferred to the finished shafts.

Roy from Pa · « **Reply #5 on:** December 05, 2020, 07:05:10 PM »

Very nice Bue.
I'll fix pictures later, on my fone now.

Mad Max · « **Reply #6 on:** December 05, 2020, 07:12:08 PM »

Quote from: Crooked Stic on December 05, 2020, 04:25:33 PM

What cha season them with.

You season them with viagra for a stiffer spine

wood carver 2 · « **Reply #7 on:** December 05, 2020, 08:02:21 PM »

If you put a 5 hp motor on it you can feed it whole logs. Mass production! 😁
Dave.

Crooked Stic · « **Reply #8 on:** December 05, 2020, 10:30:54 PM »

Good one MAX

Recurveaholic77 · « **Reply #9 on:** December 05, 2020, 11:06:38 PM »

What do you use to bind them together pine pitch? 😆

Crooked Stic · « **Reply #10 on:** December 06, 2020, 08:34:03 AM »

If that seasoning is correct they prolly be noodley after the shot.

Eric Krewson · « **Reply #11 on:** December 06, 2020, 10:21:47 AM »

The sad thing is there are people out there who would think that you are actually making real arrow shafts after seeing your pictures, plus the same people vote.

Pine · « **Reply #12 on:** December 06, 2020, 11:34:05 AM »

Ok, someone needs to ask, how do you adjust that gizmo to get the spine weight you want?
I have studied the picture and cant see how that could be adjusted.

Bob D · « **Reply #13 on:** December 06, 2020, 05:13:31 PM »

Mad Max · « **Reply #14 on:** December 06, 2020, 07:23:54 PM »

Quote from: Pine on December 06, 2020, 11:34:05 AM

Ok, someone needs to ask, how do you adjust that gizmo to get the spine weight you want?
I have studied the picture and cant see how that could be adjusted.

1/4 viagra for 600's
1/2 for 500
3/4 for 400
1 for 320

Flem · « **Reply #15 on:** December 06, 2020, 09:37:28 PM »

Thats one way to get the "shaft" Thats a bad mutha machine.

Tim Finley · « **Reply #16 on:** December 07, 2020, 09:06:15 PM »

That's really funny ! My family is of Norwegian heritage and there was always a sense of humor in everything .

Crooked Stic · « **Reply #17 on:** December 07, 2020, 10:33:56 PM »

Max I need 800s??

Mad Max · « **Reply #18 on:** December 07, 2020, 11:33:57 PM »

Your in luck, they come out 800's

Buemaker · « **Reply #19 on:** December 08, 2020, 04:06:21 AM »

Sometimes they come out stiff at both ends and soft in the middle or vice versa.

News:

Author Topic: Making arrowshafts (Read 3970 times)

Users currently browsing this topic: