Author Topic: So ya all want a BBO build? (Read 30719 times)

kennym · « **Reply #320 on:** February 02, 2021, 08:13:12 AM »

This is Hunting The Osage (and boo) Bow ...

Roy from Pa · « **Reply #321 on:** February 02, 2021, 08:16:16 AM »

Stifle yourself, Wilma:)

kennym · « **Reply #322 on:** February 02, 2021, 08:37:37 AM »

Flem · « **Reply #323 on:** February 02, 2021, 10:17:51 AM »

Looks like a compressive failure , parallel to the grain

Roy from Pa · « **Reply #324 on:** February 02, 2021, 11:37:15 AM »

Pin knot ran the whole way across the limb.

mmattockx · « **Reply #325 on:** February 02, 2021, 11:39:13 AM »

Quote from: Roy from Pa on February 02, 2021, 11:37:15 AM

Pin knot ran the whole way across the limb.

Roy,

How thick was the belly wood over top of that knot? That is, how much sound wood was there between the knot and the surface of the belly? Do you have a good side shot of that area?

Mark

Roy from Pa · « **Reply #326 on:** February 02, 2021, 11:45:09 AM »

About 1/4", that is a side shot and there is evidence on the other side that the twig ran clear across the belly.

Other side. I posted all these pictures before...

mmattockx · « **Reply #327 on:** February 02, 2021, 02:14:01 PM »

Quote from: Roy from Pa on February 02, 2021, 11:45:09 AM

About 1/4", that is a side shot and there is evidence on the other side that the twig ran clear across the belly.

Other side. I posted all these pictures before...

I know, but this time I got to wondering how much good wood there was on the belly because you don't really need much to carry the loads. The knot must have caused some prying/separating action in the core that lead to the failure.

Mark

Roy from Pa · « **Reply #328 on:** February 02, 2021, 03:22:22 PM »

That pin knot is a little old twig remains, not solid wood. Knots on the belly of a bow is bad news.
It's water over the dam now anyway,

Bvas · « **Reply #329 on:** February 02, 2021, 07:12:16 PM »

Quote from: Roy from Pa on February 02, 2021, 03:22:22 PM

It's water over the dam now anyway,

Don’t ya mean fire in the stove?

Roy from Pa · « **Reply #330 on:** February 02, 2021, 08:07:46 PM »

Not yet Bvass:)

Pat B · « **Reply #331 on:** February 03, 2021, 09:48:28 AM »

Any knot that runs across a limb is a potential failure waiting to happen. I think this knot is acting like the fulcrum causing excess bend in that area which caused the compression failure. Getting osage to fail in compression like that isn't an easy task. Well done, Roy.

Roy from Pa · « **Reply #332 on:** February 03, 2021, 12:24:37 PM »

oldandslow · « **Reply #333 on:** February 03, 2021, 04:16:48 PM »

This twig is generating a lot of growth

Buemaker · « **Reply #334 on:** February 10, 2021, 06:33:28 AM »

How long is the finished riser Roy?

Roy from Pa · « **Reply #335 on:** February 10, 2021, 06:38:56 AM »

It was 13 inches but the bow broke.

Buemaker · « **Reply #336 on:** February 10, 2021, 06:57:34 AM »

Okay. Is that the lenght you usually make? I have been using 12 inches, but are thinking of going a bit shorter for a long draw without lenghtening the bows total lenght.

Roy from Pa · « **Reply #337 on:** February 10, 2021, 07:17:55 AM »

It depends on my mood and the block of wood I have.

I have made 12" risers before, even thought about making them 10 inches.

oldandslow · « **Reply #338 on:** February 11, 2021, 06:03:50 PM »

Hey Roy, got any info on type of leather for a hand grip? Any threads that show an how to?

oldandslow · « **Reply #339 on:** February 11, 2021, 06:23:14 PM »

And another question...on a wood bow like you have done here...can a guy put a figured maple veneer over top a hickory backing?
Basically I'm thinking from the flares to tip.
Would that work?

News:

Author Topic: So ya all want a BBO build? (Read 30719 times)

Users currently browsing this topic: