Author Topic: 2021 what did you do today? (Read 149647 times)

Buemaker · « **Reply #140 on:** January 10, 2021, 01:11:58 PM »

Kingwood is looking good and an riser with Kingwood with an Jatoba I beam

Roy from Pa · « **Reply #141 on:** January 10, 2021, 01:17:34 PM »

Kenny and Bue, those are sweet.

The big auction site has horn.

kennym · « **Reply #142 on:** January 10, 2021, 01:27:19 PM »

Morado scales , usually none that light. Walnut veneers hand picked to go with the riser

Buemaker · « **Reply #143 on:** January 10, 2021, 02:08:41 PM »

Looking good Kenny.

kennym · « **Reply #144 on:** January 10, 2021, 02:56:56 PM »

That kingwood is gonna be killer , Bue.

Crooked Stic · « **Reply #145 on:** January 10, 2021, 07:01:52 PM »

Lovin Kingwood

Mad Max · « **Reply #146 on:** January 10, 2021, 07:13:59 PM »

Looks like it's going to be 2 nice risers

mmattockx · « **Reply #147 on:** January 11, 2021, 01:08:53 AM »

Continued work on my lam bow. Looks like I have the clamping sorted to where I can close the gaps at the ends of the riser and extra lam I added. Figured I would post a few semi-artistic shots showing the zero thickness tapering on the various pieces.

The riser. Shaped with a flush trim bit in my router, then feathered by hand:

The extra lam, feathered with my thickness sander:

My tip wedges, feathered from 0.096" to zero over 4" on my thickness sander:

Mark

Mad Max · « **Reply #148 on:** January 11, 2021, 07:43:33 AM »

Very Very careful with them now so you don't break it off

Crooked Stic · « **Reply #149 on:** January 11, 2021, 05:47:11 PM »

Yes sir if ya drop one of them (dont ask ) it really tends to chap your backside.

Flem · « **Reply #150 on:** January 11, 2021, 05:55:25 PM »

Those are cool pictures, makes the wood look really fibrous.

flntknp17 · « **Reply #151 on:** January 12, 2021, 09:24:04 AM »

I glued up this tri-lam boo/cherry/red oak with osage accents on Christmas Day and have been working on it slowly since. Shoots very well so far.

Buemaker · « **Reply #152 on:** January 12, 2021, 09:50:12 AM »

Looks very good.

mmattockx · « **Reply #153 on:** January 12, 2021, 10:08:18 AM »

Quote from: flntknp17 on January 12, 2021, 09:24:04 AM

I glued up this tri-lam boo/cherry/red oak with osage accents on Christmas Day and have been working on it slowly since. Shoots very well so far.

Looking good, you do a first class job on the lam bows. Dimensions/specs? That's going to look great as the osage darkens over time.

Mark

Roy from Pa · « **Reply #154 on:** January 12, 2021, 10:25:31 AM »

Shredd · « **Reply #155 on:** January 12, 2021, 10:48:25 AM »

Good Stuff...

Crooked Stic · « **Reply #156 on:** January 12, 2021, 05:05:57 PM »

Cool looking tips.

mmattockx · « **Reply #157 on:** January 14, 2021, 06:14:51 PM »

No posts in 2 days! Is everyone hungover or what?

I did a full clamp up dry fit today. Everything looks good now and I should be gluing it up in the next couple days.

I also drilled a couple dowel holes in my riser and lams to align everything.

So why does experience hurt so much?

Use 2 dowels everybody said. It aligns everything automatically they said. You know what else it also does? It puts a dowel right in the middle of my sight window.

I didn't catch it until after the holes were drilled, of course. It won't compromise the riser structure since the back lam is one piece and will provide the tension strength there, but it is going to show and look ugly. The next bow gets one stinking dowel.

Mark

kennym · « **Reply #158 on:** January 14, 2021, 06:19:03 PM »

Butcher shop here today

Mad Max · « **Reply #159 on:** January 14, 2021, 06:19:37 PM »

Put a

face on it and keep going

News:

Author Topic: 2021 what did you do today? (Read 149647 times)

Shredd

Users currently browsing this topic: