Author Topic: 2021 what did you do today? (Read 150527 times)

Jeff Freeman · « **Reply #1920 on:** July 11, 2021, 09:27:54 AM »

Puting on some sealer coats of epoxy on another New Favorite. Going to a local guy. JF

Jeff Freeman · « **Reply #1921 on:** July 11, 2021, 09:32:01 AM »

Mad Max · « **Reply #1922 on:** July 11, 2021, 09:59:30 AM »

A lot of cool stuff going on guy's

Roy from Pa · « **Reply #1923 on:** July 11, 2021, 12:51:44 PM »

Fixed them for ya, Jeff.

Welcome to the Bench....

Jeff Freeman · « **Reply #1924 on:** July 11, 2021, 12:53:00 PM »

Thank you Roy they started off straight like they're supposed to I don't know what happened. I'll get it figured out someday soon. JF

Roy from Pa · « **Reply #1925 on:** July 11, 2021, 12:58:27 PM »

Welcome...

Most of the sideways pictures comes from pictures from cell phones.

I use the Paint app in windows to rotate them, then save them, then post here.

Jeff Freeman · « **Reply #1926 on:** July 11, 2021, 01:03:52 PM »

Gluing up some Barkpocket Maple Osage, Maple and Myrtle. A New longbow for me.JF

Roy from Pa · « **Reply #1927 on:** July 11, 2021, 01:08:32 PM »

Good job:)

Jeff Freeman · « **Reply #1928 on:** July 11, 2021, 01:14:01 PM »

Hopefully there will be a cool surprise when I get the shelf cut in. Lots of planning on this one. JF

Roy from Pa · « **Reply #1929 on:** July 11, 2021, 01:21:06 PM »

Jeff Freeman · « **Reply #1930 on:** July 11, 2021, 03:49:00 PM »

Well I got my risers shaped up ready to go into a bow now I just put away for safekeeping for a while Make a pattern off this one for 68-in bow 18-in riser with this shape for me. JF

Jeff Freeman · « **Reply #1931 on:** July 11, 2021, 03:50:22 PM »

Little bit of extra weight ground copper super glued in to the deep pocket on the bottom of this riser. Not going to help a lot but what the heck. JF

Roy from Pa · « **Reply #1932 on:** July 11, 2021, 05:30:58 PM »

Nice....

Bvas · « **Reply #1933 on:** July 11, 2021, 05:59:51 PM »

Out of the oven and cleaned up. Got the limb profile marked out, but gonna have to wait for rain to quit before profiling. I do most of my profiling with a flap disc on a 4” grinder outside.

Jeff Freeman · « **Reply #1934 on:** July 11, 2021, 06:05:09 PM »

I'm with you on that.I grind my riser shape with a 6-in disc grinder air outside. My old body man tool. Not afraid to use 24 grit either.That's what I start with. JF

Longcruise · « **Reply #1935 on:** July 11, 2021, 07:52:58 PM »

Brad, is that green tape or green glass?

Bvas · « **Reply #1936 on:** July 11, 2021, 09:03:35 PM »

Green tape.
Cherry veneers under clear glass.

Jeff Freeman · « **Reply #1937 on:** July 11, 2021, 09:07:07 PM »

Cherry, maple and purple heart in the riser? JF

Roy from Pa · « **Reply #1938 on:** July 12, 2021, 04:59:59 AM »

Looks great Brad.

kennym · « **Reply #1939 on:** July 12, 2021, 08:06:33 AM »

Lookin good Jeff and Brad!

News:

Author Topic: 2021 what did you do today? (Read 150527 times)

Users currently browsing this topic: