Author Topic: 2021 what did you do today? (Read 150160 times)

4 point · « **Reply #2340 on:** August 27, 2021, 04:41:51 AM »

Flyonline, i bought a board of it awhile ago so I’d guess it was imported. It’s beautiful stuff. Looks similar to Koa.

flyonline · « **Reply #2341 on:** August 27, 2021, 05:39:16 AM »

Sure is, I ran my hands over a stack of it a while back but they didn't have anything in a size that was usable so I had to pass it up, but I'll be back (when I can

).

Eric Krewson · « **Reply #2342 on:** August 27, 2021, 09:01:40 AM »

I would give JB Weld a try first for a fix, really slop it on inside the break and out. It might not be pretty but it may work.

4 point · « **Reply #2343 on:** August 27, 2021, 07:33:34 PM »

I JB welded a motor block back together on a small block Ford once. It was broken out where the motor mount bolts on. I cleaned it up good and glued it up. I drove it for a lot of years and it was still holding, never leaked a drop of coolant

Bvas · « **Reply #2344 on:** August 27, 2021, 08:02:00 PM »

Quote from: 4 point on August 27, 2021, 07:33:34 PM

I JB welded a motor block back together on a small block Ford once. It was broken out where the motor mount bolts on. I cleaned it up good and glued it up. I drove it for a lot of years and it was still holding, never leaked a drop of coolant

Did ya throw some duct tape on it for extra insurance?

Bvas · « **Reply #2345 on:** August 27, 2021, 10:03:10 PM »

Finally got a string on the latest build.

I

Mad Max · « **Reply #2346 on:** August 27, 2021, 11:32:42 PM »

Nice Bvas

Roy from Pa · « **Reply #2347 on:** August 28, 2021, 06:43:47 AM »

Very nice Brad.

kennym · « **Reply #2348 on:** August 28, 2021, 08:33:06 AM »

I like it Brad! Nice job!

So far today I've drank coffee, and drank coffee... I seem to be doing something wrong so I'm gonna try again...

B-JS · « **Reply #2349 on:** August 28, 2021, 08:58:03 AM »

Glued Up a Strange Prototype today.

Hope IT will come Out the way i want IT.

OldRawhide42 · « **Reply #2350 on:** August 28, 2021, 09:27:29 AM »

B-JS how are you putting air in the fire hose ???

Flem · « **Reply #2351 on:** August 28, 2021, 09:33:07 AM »

OK guys, we are in the company of a serious bowyer. It's not often you see a gallon kit of EA-40 in the workshop!

Mad Max · « **Reply #2352 on:** August 28, 2021, 09:37:06 AM »

I can remember any bow you have made

B-JS · « **Reply #2353 on:** August 28, 2021, 09:41:12 AM »

Quote from: OldRawhide42 on August 28, 2021, 09:27:29 AM

B-JS how are you putting air in the fire hose ???

With a compressor?
There is a valve on the left Side.

B-JS · « **Reply #2354 on:** August 28, 2021, 09:43:53 AM »

Quote from: Flem on August 28, 2021, 09:33:07 AM

OK guys, we are in the company of a serious bowyer. It's not often you see a gallon kit of EA-40 in the workshop!

Just got them to show Off....

OldRawhide42 · « **Reply #2355 on:** August 28, 2021, 01:27:02 PM »

B-JS maybe I should reword it. How do you put the valve into the hose with the ends of the hose you have on it ??

B-JS · « **Reply #2356 on:** August 28, 2021, 01:46:28 PM »

Don't know If you have the same stuff in the States.
That are valves for Alloy Rims.
I Just make a hole in the Hose and screw them in with some washers, before i Close it with the clamp.
No Secret Sauce there.

Flem · « **Reply #2357 on:** August 28, 2021, 02:03:15 PM »

Thats slick

Much better looking than the plug arrangement I have seen in other set-ups.

B-JS · « **Reply #2358 on:** August 28, 2021, 02:08:08 PM »

I have also other nicer hoses with milled plugs.
But those are used for my fix Forms.
For Prototype Forms, i use the ugly ones.

OldRawhide42 · « **Reply #2359 on:** August 28, 2021, 02:26:12 PM »

Thank you. I dont know if we have them but I will find out.

News:

Author Topic: 2021 what did you do today? (Read 150160 times)

Users currently browsing this topic: