Author Topic: 2021 Bow Swap Progress Thread - Complete  (Read 148080 times)

Offline EvilDogBeast

  • Trad Bowhunter
  • **
  • Posts: 646
Re: 2021 Bow Swap Progress Thread
« Reply #1420 on: June 10, 2021, 04:44:07 PM »
Got the limbs squared away and the sight window cut in last night.  Shaping ye olde grip and hopefully shooting some arrows tonight!

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: 2021 Bow Swap Progress Thread
« Reply #1421 on: June 11, 2021, 08:42:04 AM »
Hey TradBowyer, Tim.....

Where are the pictures of you shooing and the full draw picture?

 :wavey:

Offline EvilDogBeast

  • Trad Bowhunter
  • **
  • Posts: 646
Re: 2021 Bow Swap Progress Thread
« Reply #1422 on: June 12, 2021, 04:52:16 PM »
Tim is out of town for the weekend and will hit us up Monday.

Got sight window and shelf finished up.  Got the grip shaped enough to hold it and put 100 arrows through it.  Shoots nice, but she's a little thumpy.  Hopefully shaping the tips cleans that up.


Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: 2021 Bow Swap Progress Thread
« Reply #1424 on: June 12, 2021, 09:14:41 PM »
Very nice, Dave.

Online wood carver 2

  • Trad Bowhunter
  • **
  • Posts: 2725
Re: 2021 Bow Swap Progress Thread
« Reply #1425 on: June 12, 2021, 09:44:06 PM »
Thanks Roy.
I spent some time shooting both bows in. The one on the left has over 250 arrows through it and the lighter bow has 60 or 70. They both put the arrows right where I’m looking
I should be shipping this week.
Dave.
" Vegetarian" another word for bad hunter.

Offline 4 point

  • Trad Bowhunter
  • **
  • Posts: 1238
Re: 2021 Bow Swap Progress Thread
« Reply #1426 on: June 12, 2021, 10:03:21 PM »
Dave, I like them both. The light one might win by a little

Offline EvilDogBeast

  • Trad Bowhunter
  • **
  • Posts: 646
Re: 2021 Bow Swap Progress Thread
« Reply #1427 on: June 12, 2021, 10:52:18 PM »
Finished shaping the grip.  Ready to shape tips and final sand tomorrow.

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: 2021 Bow Swap Progress Thread
« Reply #1428 on: June 12, 2021, 10:54:34 PM »
That 40 looks sweet to me! Both very nice but I’m likin the walnut/Osage a lot
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: 2021 Bow Swap Progress Thread
« Reply #1429 on: June 13, 2021, 07:01:56 AM »
Nice bows wood carver :thumbsup:
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline Buemaker

  • Trad Bowhunter
  • **
  • Posts: 3116
Re: 2021 Bow Swap Progress Thread
« Reply #1430 on: June 13, 2021, 07:36:03 AM »
Bows look great.

Offline skeaterbait

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 1245
Re: 2021 Bow Swap Progress Thread
« Reply #1431 on: June 13, 2021, 08:10:23 AM »
Tough call, two very nice bows you made there.
Skeater who?

Offline EvilDogBeast

  • Trad Bowhunter
  • **
  • Posts: 646
Re: 2021 Bow Swap Progress Thread
« Reply #1432 on: June 13, 2021, 03:48:27 PM »
Here is where I stand. Have to take a break from it today, wife's birthday. Have the string it will ship with on there and nock point set. Everything is sanded to 80 grit. Need to shape tips and final sand/coat. Should ship this week.








Offline EvilDogBeast

  • Trad Bowhunter
  • **
  • Posts: 646
Re: 2021 Bow Swap Progress Thread
« Reply #1433 on: June 13, 2021, 03:55:38 PM »
Side note:  I really hate that I need to put an overlay on the back to cover the veneer splice.  Any ideas on how to put it on there without covering the entirety of that wild graft section?  Drawing a blank on any other way than running it all the way up the sight window.

Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6075
Re: 2021 Bow Swap Progress Thread
« Reply #1434 on: June 13, 2021, 05:02:15 PM »
I have seen bows that in shaping the grip the part where the splice was was gone Dow to riser wood.
Also have seen that part ground flat and a short overlay covering it.
High on Archery.

Online wood carver 2

  • Trad Bowhunter
  • **
  • Posts: 2725
Re: 2021 Bow Swap Progress Thread
« Reply #1435 on: June 13, 2021, 05:24:23 PM »
Nice bow. That grain is going to pop.
Dave.
" Vegetarian" another word for bad hunter.

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: 2021 Bow Swap Progress Thread
« Reply #1436 on: June 13, 2021, 06:17:10 PM »
Nice!!  How about a pc of clear glass for overlay to round the grip a bit if that's the idea?
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Online Walt Francis

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 3106
Re: 2021 Bow Swap Progress Thread
« Reply #1437 on: June 13, 2021, 07:28:43 PM »
Thanks Roy.
I spent some time shooting both bows in. The one on the left has over 250 arrows through it and the lighter bow has 60 or 70. They both put the arrows right where I’m looking
I should be shipping this week.
Dave.

Dave,

Those are both great looking bows, personally I like the heavier one.
The broadhead used, regardless of how sharp, is nowhere as important as being able to place it in the correct spot.

Walt Francis

Regular Member of the Professional Bowhunters Society

Online Walt Francis

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 3106
Re: 2021 Bow Swap Progress Thread
« Reply #1438 on: June 13, 2021, 07:35:35 PM »
Side note:  I really hate that I need to put an overlay on the back to cover the veneer splice.  Any ideas on how to put it on there without covering the entirety of that wild graft section?  Drawing a blank on any other way than running it all the way up the sight window.

Chris,
Looking good!
I have used a small piece  6” +/-, of big horn sheep, bison, water Buffalo, or antelope horn to cover the splices.  They shape easy and look good when finished.
The broadhead used, regardless of how sharp, is nowhere as important as being able to place it in the correct spot.

Walt Francis

Regular Member of the Professional Bowhunters Society

Online Walt Francis

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 3106
Re: 2021 Bow Swap Progress Thread
« Reply #1439 on: June 13, 2021, 07:43:42 PM »
My trade bow is sprayed and curing right now.  The string length is an odd size so I will build some back up strings for it this week, add the shelf rest and side plate, the get it shipped.
The broadhead used, regardless of how sharp, is nowhere as important as being able to place it in the correct spot.

Walt Francis

Regular Member of the Professional Bowhunters Society

Users currently browsing this topic:

0 Members and 3 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©