Author Topic: 2021 Bow Swap Progress Thread - Complete (Read 147999 times)

wood carver 2 · « **Reply #20 on:** January 21, 2021, 04:54:50 PM »

Woo Hoo!!! I’ll make it a takedown. I’m sure I have an old door hinge lying around. 😁
Dave.

Roy from Pa · « **Reply #21 on:** January 21, 2021, 04:56:31 PM »

Cool the ole guy in Linneus Mo. could use another hinge:)

Out of the hot box, needs cleaned up.

wood carver 2 · « **Reply #22 on:** January 21, 2021, 04:58:06 PM »

Just for clarity, that wood is just a small sample of the quality lumber they supply us with at work to build skids and crates for the valves we build. 😕
Dave.

Crooked Stic · « **Reply #23 on:** January 21, 2021, 06:55:18 PM »

That bottom got some splat in it that will be nice.

4 point · « **Reply #24 on:** January 21, 2021, 09:26:35 PM »

Looks like this should have some nice straight grain for one of those fancy wood bows. I only make those ugly glass bows so I'll have to chop it up, maybe use it in my victims bow!

wood carver 2 · « **Reply #25 on:** January 21, 2021, 09:49:17 PM »

I’d love to see the inside of that bit of wood!
Dave.

4 point · « **Reply #26 on:** January 21, 2021, 10:22:41 PM »

Here's a little peak Dave.

EvilDogBeast · « **Reply #27 on:** January 21, 2021, 10:28:51 PM »

Am I the only one that wouldn't mind seeing that wormy spruce stabilized? Would make a pretty awesome riser.

Mad Max · « **Reply #28 on:** January 21, 2021, 10:30:22 PM »

should have some awesome veneers in there

Roy from Pa · « **Reply #29 on:** January 22, 2021, 04:47:33 AM »

Travis LOL.

That's some pretty wood inside.

wood carver 2 · « **Reply #30 on:** January 22, 2021, 08:17:58 AM »

That would look amazing in a riser. What wood is it?
Dave.

4 point · « **Reply #31 on:** January 22, 2021, 09:27:27 AM »

It's Siberian Elm

Mad Max · « **Reply #32 on:** January 22, 2021, 09:28:26 AM »

I ordered some Bocote veneers from Kennym.
and some Blood wood online for overlays

Mad Max · « **Reply #33 on:** January 22, 2021, 09:29:15 AM »

Quote from: 4 point on January 22, 2021, 09:27:27 AM

It's Siberian Elm

when are you going to cut it up?

4 point · « **Reply #34 on:** January 22, 2021, 09:42:01 AM »

I cut a small burl off it last night and i don't think it's dry enough. I thought it was dead when I cut it a year ago but I was wrong. I'm worried about it checking bad.

Mad Max · « **Reply #35 on:** January 22, 2021, 09:44:24 AM »

Can't help you there

kennym · « **Reply #36 on:** January 22, 2021, 10:13:12 AM »

I just read a post somewhere by Big Jim where I think he said he boils it to dry it . I’m sure it needs to be cut into boards first .

skeaterbait · « **Reply #37 on:** January 22, 2021, 10:17:25 AM »

Quote from: EvilDogBeast on January 21, 2021, 10:28:51 PM

Am I the only one that wouldn't mind seeing that wormy spruce stabilized? Would make a pretty awesome riser.

You are not alone, I love the look of worm wood.

I made some knife scales from wormy Locust, it's gorgeous.

wood carver 2 · « **Reply #38 on:** January 22, 2021, 10:58:59 AM »

That wormy spruce really is just junk. The holes are almost big enough for me to put my little finger in and the wood is too soft to be any good. Most of that ends up in the firewood pile. When I come across pieces like that I can only use them in non load bearing areas or just toss them if they’re bad enough.
If it was hardwood, I would fill the holes with colored epoxy. That would be something.
Dave.

4 point · « **Reply #39 on:** January 22, 2021, 11:08:28 AM »

I just searched boiling wood and it sounds like a lot of turners use that method. Might try it with a block of it. Just need to get down to use my buddy’s saw mill.

News:

Author Topic: 2021 Bow Swap Progress Thread - Complete (Read 147999 times)

Users currently browsing this topic: