Author Topic: 2021 Bow Swap Progress Thread - Complete (Read 148173 times)

Shredd · « **Reply #220 on:** February 02, 2021, 05:08:13 PM »

You Guys, Too Funny... Stic chew on a clove or two for that tooth... Might help...

Longcruise · « **Reply #221 on:** February 02, 2021, 08:28:41 PM »

Quote from: Shredd on February 02, 2021, 05:08:13 PM

You Guys, Too Funny... Stic chew on a clove or two for that tooth... Might help...

Or some betel nuts!

Frustrating day working on the form.

Frickin router got out of hand. Well mostly operator error

I'll bring it together with some bondo. Was so disgusted i swept up and called it a day.

My router is a piece of do do. It’s a 1/4" and doesn’t have the reach needed for a 1 3/4" form. I make do by raising the bit out of the chuck but that really doesn't cut it (see that pun there?

)

I think 2021 is going to be a tool upgrade year.

Pitchers tomorrow.

Mad Max · « **Reply #222 on:** February 02, 2021, 08:42:07 PM »

I bought a new D-walt 1/2"shank for the same reason.
One pass gets it now

A 1/4" flush trim bit does not cut flush because they make them for laminates, It's close, but not flush

Makes a small ridge on the form second pass

kennym · « **Reply #223 on:** February 02, 2021, 08:49:08 PM »

I wish I had gotten a Dewalt, I got a good sized Milwaukee 1/2" and I can power it out with a 1/2 x 2 pattern bit...

rainman · « **Reply #224 on:** February 03, 2021, 11:00:40 AM »

Will be cutting out bamboo this weekend. Waiting for some walnut to show up for the glue up. Next week I will be in California so no work done next week.

kennym · « **Reply #225 on:** February 03, 2021, 01:23:01 PM »

Hmmmmm

Roy from Pa · « **Reply #226 on:** February 03, 2021, 01:27:01 PM »

Ah ya adjust weight with different length bow strings..

Shredd · « **Reply #227 on:** February 03, 2021, 05:05:32 PM »

The process has begun... I picked out a few pieces of Sheoak, vintage 4/2017... Put the finishing touch in the kiln last summer... Looking fo a nice grain pattern...

Picking out the right piece, where to cut it, truing up the sides, planing down, sanding down to size, looking at all the wasted wood, time consuming just to get a square piece of wood... This by far is not my favorite part of bow building... But it has to be done...

Roy from Pa · « **Reply #228 on:** February 03, 2021, 05:12:08 PM »

Looks neat, Rich.

Mad Max · « **Reply #229 on:** February 03, 2021, 06:17:18 PM »

I got some BAD streaky glass today, can't say where I got it.
And I have Bocote veneers coming from KennyM
Plan B is Red or Black glass.
I got my first shot today, my arm is sore now

Longcruise · « **Reply #230 on:** February 03, 2021, 06:28:05 PM »

Quote from: Mad Max on February 03, 2021, 06:17:18 PM

I got some BAD streaky glass today, can't say where I got it.
And I have Bocote veneers coming from KennyM
Plan B is Red or Black glass.
I got my first shot today, my arm is sore now

Red AND black just seem made for each other.

wood carver 2 · « **Reply #231 on:** February 03, 2021, 06:49:21 PM »

I like that black.
Dave.

Roy from Pa · « **Reply #232 on:** February 03, 2021, 06:52:18 PM »

I like black on bows too.

Mad Max · « **Reply #233 on:** February 03, 2021, 07:26:50 PM »

Red it is

I'm going to do a fancy Faux finish with black paint

kennym · « **Reply #234 on:** February 03, 2021, 09:18:09 PM »

"I got some BAD streaky glass today, can't say where I got it."

Not from me tho, correct?

Mad Max · « **Reply #235 on:** February 03, 2021, 09:32:03 PM »

NOT from Kennym
sorry kenny

Mad Max · « **Reply #236 on:** February 03, 2021, 09:52:00 PM »

Quote from: Longcruise on February 03, 2021, 06:28:05 PM

Quote from: Mad Max on February 03, 2021, 06:17:18 PM
I got some BAD streaky glass today, can't say where I got it.
And I have Bocote veneers coming from KennyM
Plan B is Red or Black glass.
I got my first shot today, my arm is sore now

Red AND black just seem made for each other.

Nice shaping on the bow

kennym · « **Reply #237 on:** February 03, 2021, 09:57:23 PM »

Man that’s good , I hate streaky glass and try to catch it before it’s shipped !

Thanks!!

Shredd · « **Reply #238 on:** February 04, 2021, 12:36:34 AM »

Black on the back and Red on the belly... That's how I'd do it... Just like the Cruiser...

Mad Max · « **Reply #239 on:** February 04, 2021, 02:28:17 PM »

Should we ship UPS instead of USPS?

News:

Author Topic: 2021 Bow Swap Progress Thread - Complete (Read 148173 times)

Shredd

Shredd

Shredd

Users currently browsing this topic: