Author Topic: 2021 Bow Swap Progress Thread - Complete (Read 148214 times)

Buemaker · « **Reply #300 on:** February 08, 2021, 03:57:53 PM »

Looking good Max

Mad Max · « **Reply #301 on:** February 08, 2021, 04:20:40 PM »

Quote from: skeaterbait on February 08, 2021, 03:46:27 PM

I am starting to feel inadequate.

I think that is normal for you, Just look at your Hat wif horns

Thanks guy's

Roy from Pa · « **Reply #302 on:** February 08, 2021, 04:21:42 PM »

Mark that is sharp as heck.

LOL on skeaterbaits horny hat:)

I had to start another bow today.

Made the first one asymmetrical and didn't like how it was working out, so I cut 1.5" off the top limb and moved the arrow shelf.

Had to remove a lot of wood getting it back in sync and dropped below my victim's draw weight.

This bow will be symmetrical like all the other bows I've made.

Gonna be Osage belly, tapered Osage core lam, backed wif boo.

Ya all have any idea how fast a Grizzly 1.5hp 80 inch edge sander with 60 grit paper will rip the end of your thumb nail off?

Pretty damn fast, LOL......

wood carver 2 · « **Reply #303 on:** February 08, 2021, 04:24:26 PM »

Probably about as fast as my rigid belt sander with a 36 grit belt on. Don’t ask.
Dave.

Bvas · « **Reply #304 on:** February 08, 2021, 04:25:39 PM »

Quote from: Roy from Pa on February 08, 2021, 04:21:42 PM

Ya all have any idea how fast a Grizzly 1.5hp 80 inch edge sander with 60 grit paper will rip the end of your thumb nail off?

Pretty damn fast, LOL......

Didn’t happen wifout pitchers

Roy from Pa · « **Reply #305 on:** February 08, 2021, 04:26:01 PM »

How ya know, Dave?

Didn't have time to get the camera out, Bvass...

LOL

Mad Max · « **Reply #306 on:** February 08, 2021, 04:26:11 PM »

O _hit roy

Buemaker · « **Reply #307 on:** February 08, 2021, 04:27:32 PM »

Toe nails still okay, I hope.

wood carver 2 · « **Reply #308 on:** February 08, 2021, 04:28:21 PM »

Luckily, it just nicked my finger. Stung like a bugger though.
Dave.

Mo_coon-catcher · « **Reply #309 on:** February 08, 2021, 09:57:32 PM »

That’s looking great Mark!

I got the longstring on mine. I thought I had the floor tillered closeish, nope. Pulled to weight on the longstring and it only made it to 8”, if that. That’s what o get for liking heavy bows I guess. This is first flex with a string. I may get a rasping or two in before I call it quits for the night

Kyle

Mo_coon-catcher · « **Reply #310 on:** February 08, 2021, 10:24:25 PM »

Well it’s at a low brace of 3.5” and is pulling weight at about 16”. Now to rasp once more and super glue the knots for a little peace of mind. Then I’ll up to full brace from there. I need to do a little alignment to get things where I want them, but it’s not too bad. I should be able to get to where I normally do a second heat treat without any issues.

Kyle

Mad Max · « **Reply #311 on:** February 08, 2021, 11:51:55 PM »

skeaterbait · « **Reply #312 on:** February 09, 2021, 04:59:16 AM »

Quote from: Mad Max on February 08, 2021, 04:20:40 PM

Quote from: skeaterbait on February 08, 2021, 03:46:27 PM
I am starting to feel inadequate.

I think that is normal for you, Just look at your Hat wif horns

Thanks guy's

Don't be jealous because my horns still point up

Roy from Pa · « **Reply #313 on:** February 09, 2021, 05:22:30 AM »

Mad Max · « **Reply #314 on:** February 09, 2021, 07:19:16 PM »

I ordered one off the zon 15.00

Bvas · « **Reply #315 on:** February 09, 2021, 07:25:33 PM »

Skeeters must be the delux version.
His has fuzzy wraps so his horns don’t get cold.

kennym · « **Reply #316 on:** February 09, 2021, 07:50:49 PM »

I'd say that guy with the horns and fur at the BLM and antifa riots and the capitol attack may be selling his soon...

Roy from Pa · « **Reply #317 on:** February 09, 2021, 08:09:59 PM »

I see tip overlays in skeaters hat.

Birdbow76 · « **Reply #318 on:** February 09, 2021, 09:09:39 PM »

I’ll be building a forward handle mild ref/def for my victim. Built 2 bows over the last 2 weeks getting things dialed in. Waiting on some supplies from Kenny and we’ll be ready to go.

Walt Francis · « **Reply #319 on:** February 09, 2021, 11:54:00 PM »

Ya all have any idea how fast a Grizzly 1.5hp 80 inch edge sander with 60 grit paper will rip the end of your thumb nail off?

Pretty damn fast, LOL......
[/quote]

Probably as fast as a Jet Planer when it hits the tip of a middle finger.

So you know it really happened.

News:

Author Topic: 2021 Bow Swap Progress Thread - Complete (Read 148214 times)

Users currently browsing this topic: