Author Topic: New static----DONE (Read 7700 times)

Mad Max · « **on:** January 30, 2021, 05:05:57 PM »

I've been CAD drawing this one for about 6 years and made the lower form Yesterday.
50" NTN

Roy from Pa · « **Reply #1 on:** January 30, 2021, 05:39:50 PM »

Walt Francis · « **Reply #2 on:** January 30, 2021, 05:59:31 PM »

Mark,
That looks a lot like a Sheepeater. Brent Rudolf developed the design, him and Mark Baker made them for several years then farmed production out to Mike Westvang. I made one and sent it to Turkey several years back for the TradGang bow swap. Here is a picture of the one I still have:

They had a version with a recurve style pistol grip too. Rigidity in the tips is key to the Sheepeaters performance, it took Brent several dozen bows before he got it to where he liked it. I had one that sent a 560 grain arrow 188 FPS 48#’s. I always shoot high with those bows.

Walt Francis · « **Reply #3 on:** January 30, 2021, 06:10:17 PM »

They were all 50” nock to nock.

kennym · « **Reply #4 on:** January 30, 2021, 06:12:34 PM »

Could be a tricky one to lay up...and get off the form!

Roy from Pa · « **Reply #5 on:** January 30, 2021, 06:19:02 PM »

Nice Walt.

Ya by any chance have a full draw picture of it?

Longcruise · « **Reply #6 on:** January 30, 2021, 06:40:31 PM »

I have a soft spot for those static tips. I built a few ASL/static bows and they shot pretty good but they didn't improve that much over the more standard ASL design.

Shredd · « **Reply #7 on:** January 30, 2021, 07:30:59 PM »

No Deflex??? Especially for a shorter bow... Any reasoning behind that?? Or are you staying basically with the Sheepeater design??

Mad Max · « **Reply #8 on:** January 30, 2021, 07:46:04 PM »

Walt--Brent told me some of the tip stuff. Just going to go for it

Kenny all those 64" one's with the narrow tips were the same limb design

Roy full draw on face/back thread

Shredd I have been trying to buy one from everybody I found with my search on the net, I PMed many people.
Form is Made.
I will start with a .004 forward taper and then try a .002 forward taper

mmattockx · « **Reply #9 on:** January 30, 2021, 07:46:54 PM »

Quote from: Mad Max on January 30, 2021, 05:05:57 PM

I've been CAD drawing this one for about 6 years and made the lower form Yesterday.
50" NTN

Cool, I look forward to seeing this one come to life. I don't know if I ever want a 50" bow but this seems to me the way to get the most out of fibreglass. How wide are you thinking for the first one?

Mark

Mad Max · « **Reply #10 on:** January 30, 2021, 08:04:56 PM »

This was the first bow I saw on the net that made me want one, Bad.
I searched and searched and I found a phone number on the Black Mountain website and called it many times.
On day he answered and we talked for a hour, He told me he was Driving a Semi truck from east coast to west cost every week. He did not have any at that time but had a 56" T/D, So we met across the Mississippi river in West Memphis at the Love's truck stop about a hour from my home and I bought it from him.
Really Nice guy. Here is the Sheepeater

The Sheepeater Indians had Short Sheep Horn bows and hunted Sheep in Montana before we came here a ran them off. I think all I have said is correct, Walt will know?

Here is the 56" The Shaman
What does that mean Walt

Mad Max · « **Reply #11 on:** January 30, 2021, 08:07:49 PM »

Quote from: mmattockx on January 30, 2021, 07:46:54 PM

Quote from: Mad Max on January 30, 2021, 05:05:57 PM
I've been CAD drawing this one for about 6 years and made the lower form Yesterday.
50" NTN

Cool, I look forward to seeing this one come to life. I don't know if I ever want a 50" bow but this seems to me the way to get the most out of fibreglass. How wide are you thinking for the first one?

Mark

Start with 1-1/2" glass

KenH · « **Reply #12 on:** January 30, 2021, 10:28:13 PM »

Love this design, Max! Especially without the pistol grip -- just a plain Ottoman style forward grip. When you get it perfected, let's talk. Especially if, you know, the prototype turns out to be super low draw weight....

Walt Francis · « **Reply #13 on:** January 31, 2021, 12:25:14 AM »

Mark,

The Sheepeaters lived in what is now Yellowstone National Park, mostly late spring through early fall. As the name implies, they hunted and lived using Big Horn sheep as one of their major sources of meat. As previously noted, they were one of the few tribes that used Horn to make a bow.

I do not know much about the Shaman bow. Brent and I talked about a three piece once or twice. I believe he designed one (and didn’t like it) to allow people to travel with it. I could be mistaken, Mike & Jason might have developed it later. I do not remember seeing one in person.

Mad Max · « **Reply #14 on:** January 31, 2021, 12:43:46 AM »

So not very many out there

Stagmitis · « **Reply #15 on:** February 01, 2021, 12:26:48 PM »

Here`s a sheepeater review from Pete Ward-http://peteward.com/2007%20new%20pages/test.sheepeater.html#:~:text=The%20Sheepeater%20recurve%20is%20a,a%20very%20light%2012.4%20ounces.

Mad Max · « **Reply #16 on:** February 01, 2021, 01:30:10 PM »

Mad Max · « **Reply #17 on:** February 18, 2021, 06:53:47 PM »

Thanks Walt

Moving forward.
I got the form routed out today

kennym · « **Reply #18 on:** February 18, 2021, 08:16:41 PM »

What ya make the form out of Mark?

Gonne peg and mule tape this one?

Rody tell ya how to make a glass bow yet?

Roy from Pa · « **Reply #19 on:** February 18, 2021, 08:43:02 PM »

News:

Author Topic: New static----DONE (Read 7700 times)

Shredd

Users currently browsing this topic: