Author Topic: New static----DONE  (Read 7705 times)

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: New static
« Reply #20 on: February 18, 2021, 09:19:01 PM »
I think it's 7 ply. plywood
1-1/2" form :thumbsup:
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: New static
« Reply #21 on: April 05, 2021, 06:37:55 PM »
I got the riser pattern template to fit the form done today and pattern sanded some Osage.
I will make one for the riser belly to pattern sand most of it.

Riser is 16"



Walt Francis sent me his so I measure it up :thumbsup:
I was close in most of it but the fades.
Walt's is 63#@27"



I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: New static
« Reply #22 on: April 05, 2021, 08:55:03 PM »
 :thumbsup: :thumbsup:

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: New static
« Reply #23 on: April 05, 2021, 09:34:48 PM »
This should be good!!   :thumbsup:
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline bigbob2

  • Trad Bowhunter
  • **
  • Posts: 2160
Re: New static
« Reply #24 on: April 09, 2021, 10:03:48 PM »
I reckon it will have some oomph!

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: New static
« Reply #25 on: April 10, 2021, 08:24:30 AM »
Still a lot of work to do on the form, it has a little warp from end to end so I have some angle iron to bolt to it, and the hardware for the form and the washers to keep the lams in line. I may have to make the form hardware because of the angle iron being in the way.
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: New static-------GOT IT BRACED
« Reply #26 on: April 22, 2021, 07:05:54 PM »
 :jumper:

50# now still needs rounding over  :thumbsup:

Off the form and buggers cleaned up.



Profiled the limb width





The other bow is behind my bow, mine needs a little tiller adjustment.




I put the 2 pictures together on paint

« Last Edit: April 22, 2021, 08:58:58 PM by Mad Max »
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Shredd

  • Guest
Re: New static
« Reply #27 on: April 22, 2021, 07:58:51 PM »
 :shaka:

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: New static
« Reply #28 on: April 22, 2021, 08:47:57 PM »
Nice job...

Offline Buemaker

  • Trad Bowhunter
  • **
  • Posts: 3116
Re: New static----GOT IT BRACED
« Reply #29 on: April 23, 2021, 03:42:35 AM »
Gonna be a lot of sheepeating now. :bigsmyl:

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: New static----GOT IT BRACED
« Reply #30 on: April 23, 2021, 08:19:35 AM »
 :biglaugh:
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online Birdbow76

  • Trad Bowhunter
  • **
  • Posts: 42
Re: New static----GOT IT BRACED
« Reply #31 on: April 23, 2021, 10:08:05 AM »
That's a cool little bow. I wanted one of those Sheepeater's when they were being made but never got around to it.

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: New static----GOT IT BRACED
« Reply #32 on: April 23, 2021, 02:48:11 PM »
I looked for many years and never could find one.
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: New static----GOT IT BRACED
« Reply #33 on: April 23, 2021, 03:03:35 PM »
Well ya have a nice one now....

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: New static----GOT IT BRACED
« Reply #34 on: April 23, 2021, 05:43:58 PM »
 :thumbsup:
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline Buemaker

  • Trad Bowhunter
  • **
  • Posts: 3116
Re: New static----GOT IT BRACED
« Reply #35 on: April 23, 2021, 05:48:57 PM »
Interesting design. What taper rate are you using and what was used in the Sheepeater?

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: New static----GOT IT BRACED
« Reply #36 on: April 23, 2021, 06:43:45 PM »
Same as the Sheepeater, .00something :tongue:
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: New static----GOT IT BRACED
« Reply #37 on: April 23, 2021, 07:29:34 PM »
Same as the Sheepeater, .00something :tongue:

Can you make that in a fraction so's you don't cornfuse Rody?  :biglaugh:
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: New static----GOT IT BRACED
« Reply #38 on: April 23, 2021, 07:31:45 PM »
I fuggered it out...

Offline ztontonz

  • Trad Bowhunter
  • **
  • Posts: 314
Re: New static----GOT IT BRACED
« Reply #39 on: April 23, 2021, 07:53:02 PM »
Coming allong nicely!

Users currently browsing this topic:

0 Members and 4 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©