Author Topic: Super Short FHLB (Read 5202 times)

kennym · « **Reply #20 on:** February 02, 2021, 12:59:38 PM »

Been there ! Got a half dozen T shirts...

Crooked Stic · « **Reply #21 on:** February 02, 2021, 04:32:17 PM »

Talking about your tapers. This on is 56 in. 13 in. riser with .004 forward taper. This one can go 30 in. but they look weird at full draw. For a shorter draw the riser could be longer.

skeaterbait · « **Reply #22 on:** February 02, 2021, 04:39:24 PM »

Wow Stic, that's a fine looking bow you got there.

Is that your own design?

Roy from Pa · « **Reply #23 on:** February 02, 2021, 05:10:10 PM »

Sweet bow Mike

Crooked Stic · « **Reply #24 on:** February 02, 2021, 06:03:21 PM »

Lonnie parts of it are pirated.

Roy from Pa · « **Reply #25 on:** February 02, 2021, 06:26:42 PM »

Quote from: Crooked Stic on February 02, 2021, 06:03:21 PM

Lonnie parts of it are pirated.

Oh you dirty old bugger...

Mad Max · « **Reply #26 on:** February 02, 2021, 06:31:27 PM »

Quote from: Crooked Stic on February 02, 2021, 06:03:21 PM

Lonnie parts of it are pirated.

arrr matey

JGR1269 · « **Reply #27 on:** February 02, 2021, 06:40:52 PM »

Very nice.

JGR1269 · « **Reply #28 on:** February 06, 2021, 03:27:24 PM »

48” 46.7#@26” with 8 1/8” brace height. Limbs are straight and tiller came out dead even. Currently 5/8” at the tips and 1 1/2” at the fade outs. Not sure how I feel about it. I think somebody with 24-25” draw length could shoot it comfortably but it’s stacking quickly beyond that. I would like to see a little more reflex curve mid-limb at brace. I went with .003 total taper so any input on what to change is appreciated.

onetone · « **Reply #29 on:** February 06, 2021, 05:41:21 PM »

So in the photo the bow is drawn to 26”? Looks good to my eye.

Longcruise · « **Reply #30 on:** February 06, 2021, 05:53:09 PM »

Quote from: JGR1269 on February 06, 2021, 03:27:24 PM

48” 46.7#@26” with 8 1/8” brace height. Limbs are straight and tiller came out dead even. Currently 5/8” at the tips and 1 1/2” at the fade outs. Not sure how I feel about it. I think somebody with 24-25” draw length could shoot it comfortably but it’s stacking quickly beyond that. I would like to see a little more reflex curve mid-limb at brace. I went with .003 total taper so any input on what to change is appreciated.

What is the taper rate?

You could go back to the form and put more reflex in it.

Other things to do with the same form would be less taper and/or tip wedges.

Others probably have further suggestions.

Crooked Stic · « **Reply #31 on:** February 06, 2021, 06:56:10 PM »

Whatever you got it pulled to in the pic you are out of draw. Needs tip wedge for sure.and the deepest part of the deflex further toward the tip. Keeping it a bit stiffer to mid limb.

Longcruise · « **Reply #32 on:** February 06, 2021, 08:47:44 PM »

As it is you have a perfect formula for a small person or kids bow by building with a smaller stack.

onetone · « **Reply #33 on:** February 06, 2021, 11:15:59 PM »

Stic is right, the angle between the string and the limb tips has passed 90 deg. So the bow is stacking seriously.

JGR1269 · « **Reply #34 on:** February 07, 2021, 12:06:57 PM »

I decided to take some weight off and make it a kids or woman’s bow. Yesterday it was gaining 5 pounds from 26-27”, now it’s gaining 3 pounds per inch over the 25-27” range. I could shoot it at my length but that’s about max.

kennym · « **Reply #35 on:** February 07, 2021, 02:02:48 PM »

On 48” and longbow I’m not sure what answer is. Recurves have been made that short but I think finger pinch will be a for sure with a longbow .

Bow looks sweet tho!

JGR1269 · « **Reply #36 on:** February 08, 2021, 01:41:18 PM »

Hey Kenny, do you think going with less taper like you did will give me the look I’m after strung? I could shoot this the way it is now at my draw length at 38 pounds comfortably. I’m going to build another one at 52” in the 42 pound range at my length.

kennym · « **Reply #37 on:** February 08, 2021, 02:37:11 PM »

I think so, I dropped from .003 to .001 with power lam and tip wedges and it made a lot of difference.

Shredd · « **Reply #38 on:** February 08, 2021, 02:59:22 PM »

Go down to a 7" to 7 1/4" brace height and try it out... You may gain an inch or two before stacking and you may get the look you want with reflexed limbs... Next I would keep most things the same and make the next bow 50" with a 7" brace... She looks like she is bending good to me although I would like to see a pic at 20" of draw...

Shredd · « **Reply #39 on:** February 08, 2021, 03:05:25 PM »

To keep the bow that size and you want the limbs to be reflexed at brace you will have to put on a longer string and a shorter brace height or change the angle of your fades....

Just my opinion...

News:

Author Topic: Super Short FHLB (Read 5202 times)

Shredd

Shredd

Users currently browsing this topic: