« previous next »
Pages: [1] 2   Go Down

Author Topic: Belt sander modify  (Read 3563 times)

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Belt sander modify
« on: February 16, 2021, 07:11:04 PM »
I bought a Grizzly G0512 - 6" x 80" Edge Sander w/ Wrap-Around Table years back and it had some issues.
The press board Table top with Formica lam. was not flat.
The angle brackets to hold the table top to the machine were warp because of the long slot punched in it.

So I got some 1 x 1 x 1/8" angle aluminum, carriage bolt 50 I think, nuts.
I drilled the holes and bolted the angle alum. to the bottom. look close on the 2nd picture and you can see some.

For the warped angle bracket I welded a 1/4" x1-1/2" to make it like angle iron and 4 turn buckles 2nd picture, The angle alum. for the turn buckles is 2x2 x1/8"

The table was design to be raised and lowered, BUT for how I wanted to use mine I saw no need to raise the table.
The table is nice and flat and square to the sanding belt. :thumbsup:




« Last Edit: February 16, 2021, 07:50:44 PM by Mad Max »
Logged
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Shredd

  • Guest
Re: Belt sander modify
« Reply #1 on: February 16, 2021, 07:49:43 PM »
  Shweet...  Kinda looks like you know what your doin...   :thumbsup:

   I swear...  Most like everything else made nowadays...  It looks good but the quality sucks...  I bought a Jet standing drill press bout 5 years ago...  Very disappointed in the quality...  Did not see any difference in that one and a harbor freight one... Wait...  There was a big difference...  The Jet one was twice the price...   :saywhat:
Logged

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Belt sander modify
« Reply #2 on: February 16, 2021, 08:39:14 PM »
Yeah I took my hook and loop of my baby drum sander too :tongue:
Logged
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline Flem

  • Trad Bowhunter
  • **
  • Posts: 2985
  • "Don't quote me on that!"
Re: Belt sander modify
« Reply #3 on: February 17, 2021, 10:17:27 AM »
Nice fix Max :thumbsup:  That was a lot of work for a new machine! I don't think I have ever bought a woodworking machine that did not have some slop, runout or lack of flatness. I think that why I started making my own. If they are going to be flawed, they might as well be cheap also :)
Logged

Offline Bowjunkie

  • Trad Bowhunter
  • **
  • Posts: 2324
Re: Belt sander modify
« Reply #4 on: February 17, 2021, 10:20:52 AM »
Good idea. Adapt and overcome.
Logged

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: Belt sander modify
« Reply #5 on: February 17, 2021, 10:48:52 AM »
 Kinda looks like you know what your doin...

Now that's funny right thar:)

 :laughing:

Logged

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Belt sander modify
« Reply #6 on: February 17, 2021, 12:14:44 PM »
Fabricating is what I did all my life
Logged
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online Longcruise

  • Trad Bowhunter
  • **
  • Posts: 1335
Re: Belt sander modify
« Reply #7 on: February 17, 2021, 02:29:08 PM »
Quote from: Mad Max on February 17, 2021, 12:14:44 PM
Fabricating is what I did all my life

I'm a fabricator too, but sort of a different kind!  :)
Logged
"Every man is the creature of the age in which he lives;  very few are able to raise themselves above the ideas of the time"     Voltaire

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Belt sander modify
« Reply #8 on: February 17, 2021, 04:16:38 PM »
What kind is that Longcruis :)
Logged
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline Lefty38-55

  • Trad Bowhunter
  • **
  • Posts: 23
Re: Belt sander modify
« Reply #9 on: February 17, 2021, 04:25:34 PM »
Quote from: Mad Max on February 17, 2021, 04:16:38 PM
What kind is that Longcruis :)
My best guess is that he recalls a lot of great stories ... and some of them are even true :deadhorse: !
Logged

Online Longcruise

  • Trad Bowhunter
  • **
  • Posts: 1335
Re: Belt sander modify
« Reply #10 on: February 17, 2021, 04:29:20 PM »
Quote from: Lefty38-55 on February 17, 2021, 04:25:34 PM
Quote from: Mad Max on February 17, 2021, 04:16:38 PM
What kind is that Longcruis :)
My best guess is that he recalls a lot of great stories ... and some of them are even true :deadhorse: !

All my stories are true right down to the smallest details.    :nono:
Logged
"Every man is the creature of the age in which he lives;  very few are able to raise themselves above the ideas of the time"     Voltaire

Offline Crittergetter

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 2634
Re: Belt sander modify
« Reply #11 on: February 18, 2021, 12:32:39 PM »
Cool mod!
When I first got mine I was really frustrated and couldn’t understand why a brand new machine wouldn’t have a table that was square to the platen.
Logged
An elitist mentality creates discord, even among the elite!
"I went jackalope hunting but all I saw was does!"
Luck is when preparedness meets opportunity, I just need more opportunities!

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Belt sander modify
« Reply #12 on: February 18, 2021, 01:39:38 PM »
Quote from: Crittergetter on February 18, 2021, 12:32:39 PM
Cool mod!
When I first got mine I was really frustrated and couldn’t understand why a brand new machine wouldn’t have a table that was square to the platen.

It's all about the $ and they don't care
Logged
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Belt sander modify
« Reply #13 on: February 18, 2021, 01:44:27 PM »
I was in a hurry to get this machine put together when I got it, so I went down to Lowes and all they had was the----- 1 x1x 1/8 alum. angle.
If I was to do it again I would use 1-1/2" angle.
But this is holding up good :thumbsup:
Logged
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: Belt sander modify
« Reply #14 on: February 18, 2021, 01:57:47 PM »
And here all this time I thought you was a real fabricator?

Using weak aluminum instead of steel angle iron.

Priceless:)
Logged

Online Longcruise

  • Trad Bowhunter
  • **
  • Posts: 1335
Re: Belt sander modify
« Reply #15 on: February 18, 2021, 06:11:44 PM »
He'll never get into the union. :)
Logged
"Every man is the creature of the age in which he lives;  very few are able to raise themselves above the ideas of the time"     Voltaire

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: Belt sander modify
« Reply #16 on: February 18, 2021, 08:19:26 PM »
Thats a great idea!

Your sander got the platen on that side? 
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Belt sander modify
« Reply #17 on: February 18, 2021, 09:17:36 PM »
Quote from: kennym on February 18, 2021, 08:19:26 PM
Thats a great idea!

Your sander got the platen on that side?

No kenny the other side was pilled up wif junk :laughing:
Logged
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: Belt sander modify
« Reply #18 on: February 18, 2021, 10:01:09 PM »
Mine only has it on the other side, nuthin behind the belt on the off side
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: Belt sander modify
« Reply #19 on: February 19, 2021, 03:52:43 AM »
Same thing wif mine.

Mark you have those bracket placed on the back side, right?
Logged
Pages: [1] 2   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©