Author Topic: WTT (Read 2827 times)

Buemaker · « **on:** February 18, 2021, 05:13:02 AM »

Is there someplace one can see the test results from the WTT?

skeaterbait · « **Reply #1 on:** February 18, 2021, 06:38:48 AM »

WTT?????

Pat B · « **Reply #2 on:** February 18, 2021, 07:34:40 AM »

I know WTF but not WTT.

Shredd · « **Reply #3 on:** February 18, 2021, 07:38:38 AM »

Sending you guys links in a pm... You are not allowed to post links of another archery site on here...

The way I understand it, it is like running two hots to a 110v device... It will blow up...

Roy from Pa · « **Reply #4 on:** February 18, 2021, 07:49:18 AM »

Thanks Rich

Shredd · « **Reply #5 on:** February 18, 2021, 07:54:48 AM »

Any time bud... Hope you didn't mind the joke...

Crooked Stic · « **Reply #6 on:** February 18, 2021, 08:14:10 AM »

Walk the Talk. On another site. Bow speed testing out of a shooting machine. 10 and 9 GPP
Was a hot rod class also using lower brace and I think a real skinny string.
If Rich did not get you the link PM me.

Roy from Pa · « **Reply #7 on:** February 18, 2021, 08:15:17 AM »

Not at all...

Just trying to keep the bench running smooth.

Shredd · « **Reply #8 on:** February 18, 2021, 08:29:34 AM »

Stic... Send me a link on the 9gpp... I do not have that one...

Buemaker · « **Reply #9 on:** February 18, 2021, 12:50:34 PM »

Stic, send it to me too if you have it.

williwaw · « **Reply #10 on:** February 25, 2021, 03:34:39 PM »

With a wood bow, if you ask too much of the wood performance drops off quickly. set and loss of high early draw weight and even breakage. loss of arrow speed.

I'm looking over some of these hot rod designs and WTT competition results, and need to ask if similar things happens with some glass bows? Short of catastrophic limb/glass failure, what are the symptoms of core problems associated with designs that ask too much of the materiels?
or from choosing less than top quality core wood?

Mad Max · « **Reply #11 on:** February 25, 2021, 05:07:48 PM »

I keep hearing about core failure on glass bows or crushing, but never see anything.

If your glass bow breaks at the fades you did not make the fades correct

I made a 64" T/D static recurve and the guy draws it to 36"
One just like this.
Limb butt wedges are .036 per inch taper

Crooked Stic · « **Reply #12 on:** February 25, 2021, 07:30:59 PM »

If you gonna draw that far your wedges probably need to be straight long taper so they will bend some also. Thats what the original reason of a power lam to take the load of the fades. So a long straight taper will do that.

williwaw · « **Reply #13 on:** February 25, 2021, 08:18:13 PM »

Quote

If you gonna draw that far your wedges probably need to be straight long taper

full limb length long?

Mad Max · « **Reply #14 on:** February 25, 2021, 08:27:11 PM »

Stic if your talking to me I did not know he was going to draw it that far.
the bow was already made and he wanted it.

williwaw · « **Reply #15 on:** February 25, 2021, 08:48:10 PM »

Quote from: Mad Max on February 25, 2021, 08:27:11 PM

Stic if your talking to me I did not know he was going to draw it that far.
the bow was already made and he wanted it.

MM,
asked a different way, you do not like to see your bows overdrawn from the design draw length?

If the bow does not break, what do you consider the damage to be? speed loss? set taking?

Mad Max · « **Reply #16 on:** February 25, 2021, 08:49:46 PM »

Quote from: Crooked Stic on February 25, 2021, 07:30:59 PM

If you gonna draw that far your wedges probably need to be straight long taper so they will bend some also. Thats what the original reason of a power lam to take the load of the fades. So a long straight taper will do that.

what is your taper rate on your long wedge from 0" to 3" from the feather end

Mad Max · « **Reply #17 on:** February 25, 2021, 09:04:03 PM »

Quote from: williwaw on February 25, 2021, 08:48:10 PM

Quote from: Mad Max on February 25, 2021, 08:27:11 PM
Stic if your talking to me I did not know he was going to draw it that far.
the bow was already made and he wanted it.

MM,
asked a different way, you do not like to see your bows overdrawn from the design draw length?

If the bow does not break, what do you consider the damage to be? speed loss? set taking?

Who has a fiberglass bow that has set in the limbs?
I will post this pictures again
50" NTN, the nocks are 7-1/2" in front of the grip
just to brace this 50" bow the nock moves 15"

This bow below is at least 20 years old and 70#@28"

No set, no crushing

williwaw · « **Reply #18 on:** February 25, 2021, 09:32:52 PM »

certainly a performer, cool bow. I asked about set etc, on account of your statement about what you consider overdrawing. and the implications for the bow.

BTW, how wide are the limbs on that shorty?

Mad Max · « **Reply #19 on:** February 25, 2021, 09:45:20 PM »

He told me it smoked a arrow at 36" draw, I was sure it could be drawn to 32".
It's his bow he can draw it as far as he want to.

1.4 at the widest part

News:

Author Topic: WTT (Read 2827 times)

Shredd

Shredd

Shredd

Users currently browsing this topic: