« previous next »
Pages: [1]   Go Down

Author Topic: Botched limb alignment .....  (Read 1000 times)

Offline TX FLY CASTER

  • Trad Bowhunter
  • **
  • Posts: 113
Botched limb alignment .....
« on: March 31, 2021, 01:02:27 PM »
 Decided to build myself a new take down. Only have the Bingham drill jig....needless to say its off by around .020. Anyone ever fill the bolt and pin holes on a set of limbs and re drill? Curious if I could fill with smooth on.
Logged

Offline Bow Bender

  • Trad Bowhunter
  • **
  • Posts: 277
Re: Botched limb alignment .....
« Reply #1 on: March 31, 2021, 01:29:45 PM »
Smoth on should work or you could glue in a hardwood dowel or plug then re-drill.  Take care when re-drilling because the bit will want to drift to the softer material.
Logged
If I'd known that I would live this long I'd have taken better care of myself.

Offline 4 point

  • Trad Bowhunter
  • **
  • Posts: 1238
Re: Botched limb alignment .....
« Reply #2 on: March 31, 2021, 02:36:27 PM »
I’ve glued hard wood dowels in them with smooth on then redrilled. Covered them with a overlay and you couldn’t tell I screwed up. I actually drilled the holes backwards once and had to fix that
« Last Edit: March 31, 2021, 02:53:54 PM by 4 point »
Logged

Offline skeaterbait

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 1245
Re: Botched limb alignment .....
« Reply #3 on: April 01, 2021, 12:22:28 PM »
I use dowels as well.
Logged
Skeater who?
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©