Author Topic: Top Half of Bow Form Question  (Read 882 times)

Offline EzellH93

  • Trad Bowhunter
  • **
  • Posts: 11
Top Half of Bow Form Question
« on: April 25, 2021, 08:36:22 AM »
I understand that the bottom half needs to be pretty much perfectly smooth and 90* to the side. What about the top? I cut out the riser pattern and it’s 90* but not perfectly smooth. I’m wondering how important the upper half is since none of the lams actually touch this part but rather the hose does.

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Top Half of Bow Form Question
« Reply #1 on: April 25, 2021, 08:39:55 AM »
As long as it will close the gaps in the lams when the air hose is  inflated it good. :thumbsup:
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6075
Re: Top Half of Bow Form Question
« Reply #2 on: April 27, 2021, 08:10:43 AM »
Perfect is always better but better the bottom is perfect. As long as your gap is right it don't have to be smooth.
High on Archery.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©