Author Topic: Finally did it! (Read 3469 times)

JGR1269 · « **on:** May 09, 2021, 04:46:28 PM »

I’ve had a sheet of .040 carbon fiber laying around for six years. I was always going to use it in a bow build but just never did. Last week I finished up my last gift bow for now so I decided to build one for myself. I went with one of my short, forward handle hybrid designs at 54”. I got it glued up this morning. I went with Redheart for the riser, Bamboo cores, and carbon fiber veneers.

Flem · « **Reply #1 on:** May 09, 2021, 05:05:18 PM »

Is that a rigid material that you used?

Crooked Stic · « **Reply #2 on:** May 09, 2021, 05:07:43 PM »

Carbon front a belly ?? .040 is a lot. How much did you reduce your stack.

JGR1269 · « **Reply #3 on:** May 09, 2021, 06:07:42 PM »

I took it down to .020 in my drum sander.

JGR1269 · « **Reply #4 on:** May 09, 2021, 06:09:20 PM »

It was more for the carbon fiber look than for performance. It looks great but my arms are still itching from the dust.

pditto613 · « **Reply #5 on:** May 10, 2021, 08:41:03 AM »

What did you cut the sheet with?

kennym · « **Reply #6 on:** May 10, 2021, 08:49:32 AM »

Lookin good!!

JGR1269 · « **Reply #7 on:** May 10, 2021, 10:19:14 AM »

Cut with a straight edge and razor knife.

Flem · « **Reply #8 on:** May 10, 2021, 11:27:04 AM »

With than fancy carbon look, if it does not work out as a bow, you can use it as a hood ornament

Shredd · « **Reply #9 on:** May 10, 2021, 01:29:13 PM »

Quote from: JGR1269 on May 09, 2021, 06:07:42 PM

I took it down to .020 in my drum sander.

Oh no... That does not sound good to me... You removed have the weave... Now I am assuming you got a bunch of small pieces of carbon totally relying on the epoxy to hold it together lengthwise...

JGR1269 · « **Reply #10 on:** May 10, 2021, 04:15:30 PM »

I took material off the back side to level it out since it was not flat. The front side had a high gloss finish that I sanded for glue up.

Shredd · « **Reply #11 on:** May 10, 2021, 10:09:18 PM »

Well if you went from .040 to .020 and took half the fibers out on a weave, I am not sure it is a good thing... With unidirectional it would be fine...

Maybe someone else can chime in on this...

B-JS · « **Reply #12 on:** May 11, 2021, 01:09:05 AM »

It's used as veneer.
So there should be no issue.

Shredd · « **Reply #13 on:** May 11, 2021, 06:48:20 AM »

Quote from: B-JS on May 11, 2021, 01:09:05 AM

It's used as veneer.
So there should be no issue.

Oh... Ok...

So they are going under glass??

B-JS · « **Reply #14 on:** May 11, 2021, 09:13:38 AM »

If Not, i would doubt, a 0.02 Sheet of 90/0 Carbon will hold the pressure at the Belly.

This, plus he wrote veneers, plus he sanded the High Gloss Front for glue up...
Let me guess, it's used as veneer under Glass.

But maybe i'm wrong.

JGR1269 · « **Reply #15 on:** May 11, 2021, 11:39:53 AM »

Yes it is under glass.

Shredd · « **Reply #16 on:** May 11, 2021, 11:31:49 PM »

Mike L. · « **Reply #17 on:** May 16, 2021, 04:49:25 PM »

I really like the look of carbon fiber. The bow is looking good! What are you going to do with the handle?

JGR1269 · « **Reply #18 on:** May 16, 2021, 07:25:03 PM »

Quote from: Mike L. on May 16, 2021, 04:49:25 PM

I really like the look of carbon fiber. The bow is looking good! What are you going to do with the handle?

Mad Max · « **Reply #19 on:** May 16, 2021, 07:31:24 PM »

Most excellent

News:

Author Topic: Finally did it! (Read 3469 times)

Shredd

Shredd

Shredd

Shredd

Users currently browsing this topic: