« previous next »
Pages: [1]   Go Down

Author Topic: Finishing Spectraply  (Read 1160 times)

Online Longcruise

  • Trad Bowhunter
  • **
  • Posts: 1335
Finishing Spectraply
« on: May 25, 2021, 06:00:54 PM »
Any tips or dos and don'ts for finishing Spectraply?

It's really kinda different than anything I've worked with before.  So far not my favorite stuff but I'm still ready to like it.
Logged
"Every man is the creature of the age in which he lives;  very few are able to raise themselves above the ideas of the time"     Voltaire

Offline EvilDogBeast

  • Trad Bowhunter
  • **
  • Posts: 646
Re: Finishing Spectraply
« Reply #1 on: May 25, 2021, 06:18:17 PM »
I've never used Spectraply, but I would guess you need some sanding sealer.  I used Minwax sanding sealer on a wenge riser and it worked perfectly under the VHT satin.
Logged

Online Longcruise

  • Trad Bowhunter
  • **
  • Posts: 1335
Re: Finishing Spectraply
« Reply #2 on: May 25, 2021, 07:29:53 PM »
I'm up for anything that works on wenge!  I'm picking some up tomorrow.
Logged
"Every man is the creature of the age in which he lives;  very few are able to raise themselves above the ideas of the time"     Voltaire

Offline pditto613

  • Trad Bowhunter
  • **
  • Posts: 236
Re: Finishing Spectraply
« Reply #3 on: May 27, 2021, 01:36:13 PM »
I am spraying ml Campbell’s KRystal finish.  I spray two coats then lightly sand  with 320.  Then 2 more coats. 
Logged
"the older I get the better I was"

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: Finishing Spectraply
« Reply #4 on: May 27, 2021, 03:18:46 PM »
It is easy to finish, sands easy, and you can pretty much spray anything on it.  It's just yellow birch dyed and glued up.
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6075
Re: Finishing Spectraply
« Reply #5 on: May 27, 2021, 09:29:31 PM »
Seems the last I got was a little quality. I usally base coat with lacquer then several coats of Krystal dull on the riser part. only a couple of coats on the glass.
Logged
High on Archery.

Offline Flem

  • Trad Bowhunter
  • **
  • Posts: 2985
  • "Don't quote me on that!"
Re: Finishing Spectraply
« Reply #6 on: May 28, 2021, 08:17:45 AM »
If I ever have any questions about how something is going to finish out, its gets a coat of Vinyl sealer first.
The stuff if tough as nails and sticks like glue.
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©