Author Topic: True oil?  (Read 2250 times)

Offline oldandslow

  • Trad Bowhunter
  • **
  • Posts: 221
True oil?
« on: September 07, 2021, 01:46:41 PM »
Probably a topic beat to death...but an excuse to post a pic...
Who uses true oil and do you also use poly over top?






Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20689
Re: True oil?
« Reply #1 on: September 07, 2021, 01:55:46 PM »
Fixed yer pichers for ya...

I believe with tru-oil ya just scuff it up with steel wool to dull it a bit.

Nice looking bow ole timer.

Offline oldandslow

  • Trad Bowhunter
  • **
  • Posts: 221
Re: True oil?
« Reply #2 on: September 07, 2021, 02:14:37 PM »
I'm just applying the oil now. My thought is that I can do poly over that glass portion...
« Last Edit: September 07, 2021, 02:20:03 PM by oldandslow »

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: True oil?
« Reply #3 on: September 07, 2021, 03:48:01 PM »
On bows I use 5 to 6 coats of Tru-Oil with a 0000 steel wool rub down between each coat and a quick spray of satin poly over that to cut the shine.  :thumbsup:
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline oldandslow

  • Trad Bowhunter
  • **
  • Posts: 221
Re: True oil?
« Reply #4 on: September 07, 2021, 04:17:27 PM »
How long between coats?
Any point to tru oil the glass?

Offline Flem

  • Trad Bowhunter
  • **
  • Posts: 2985
  • "Don't quote me on that!"
Re: True oil?
« Reply #5 on: September 07, 2021, 04:41:49 PM »
Don't know about the Tru oil, but that is a really fine looking bow :thumbsup: Kind of has a 1960"s style to it.
Very nice.

Online Jeff Freeman

  • Trad Bowhunter
  • **
  • Posts: 392
  • Just a Hobby, gotta keep it fun 🏹
Re: True oil?
« Reply #6 on: September 07, 2021, 04:43:40 PM »
No point in putting true oil on the glass. If you're going to spray  over true oil, which I wouldn't. You will put a coat of clear on the glass when you spray the whole bow. I would only use the light gray scotch bright when scuffing true oil. Because the steel can get worked into the grain and then later on it will rust. JF
🦌🏹😃

Offline oldandslow

  • Trad Bowhunter
  • **
  • Posts: 221
Re: True oil?
« Reply #7 on: September 07, 2021, 04:54:23 PM »
Don't know about the Tru oil, but that is a really fine looking bow :thumbsup: Kind of has a 1960"s style to it.
Very nice.

Thnk. Will get as couple more pics up when the stuff dries.

Offline oldandslow

  • Trad Bowhunter
  • **
  • Posts: 221
Re: True oil?
« Reply #8 on: September 07, 2021, 04:55:21 PM »
No point in putting true oil on the glass. If you're going to spray  over true oil, which I wouldn't. You will put a coat of clear on the glass when you spray the whole bow. I would only use the light gray scotch bright when scuffing true oil. Because the steel can get worked into the grain and then later on it will rust. JF

Good tip with the grey stuff.

Online Jeff Freeman

  • Trad Bowhunter
  • **
  • Posts: 392
  • Just a Hobby, gotta keep it fun 🏹
Re: True oil?
« Reply #9 on: September 07, 2021, 04:55:48 PM »
No need to rush between your coats of true oil. You've worked a long time on a nice looking bow, so let it dry in between as it needs. We definitely want to see pictures when you're done, great job so far. JF
🦌🏹😃

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: True oil?
« Reply #10 on: September 07, 2021, 11:49:58 PM »
Cure time for Tru-Oil depends on the R/H. High humidity will cause slow curing. Generally 24 hours will be plenty per coat but in dry conditions you can do a couple of coats in 24 hours. Usually the first coat takes longer to cure but it's probably a thicker layer because it's filling the grain.
 I'll have to try the Scotch Bright pads.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Mark R

  • Trad Bowhunter
  • **
  • Posts: 503
Re: True oil?
« Reply #11 on: September 08, 2021, 12:11:12 PM »
I use True Oil exclusively now,  I found out if you put it on sparingly, talking a drop on a T shirt rag and rub it in with a finger and just add enough with out over saturating, it will dry within 4 hours and you can apply again, yes high humidity will take a little longer. I can often get 4 coats in 1 day. It looks like not much happening until after 5 coats and then it starts to look like glass with additional coats, I usually do 8 coats takes about 5 min. a coat, totally done in a couple days.  I use a latex finger tip protector under rag to apply, there is no strong bad smell and no big clean up, I can do it in the house and yes I do apply it to the glass maybe 2 or 3 light coats after using 400 grit to just get the shine off. Applying it this way gets it into the pours deeply and really enhances the grain, even scratches  unless very deep won't mess with moisture penetration. If you try to rush it, over saturate it, it will take longer to dry and you will have to sand between coats. I rarely sand between coats unless I sometimes apply a little to much. Plenty of ways to dull the finish if you want I don't. Been doing it this way for years. JMHO   

Offline oldandslow

  • Trad Bowhunter
  • **
  • Posts: 221
Re: True oil?
« Reply #12 on: September 08, 2021, 12:39:08 PM »
Thanks MarkR. That sounds like what I'm looking for

Offline oldandslow

  • Trad Bowhunter
  • **
  • Posts: 221
Re: True oil?
« Reply #13 on: September 08, 2021, 12:40:49 PM »
Drying


Offline oldandslow

  • Trad Bowhunter
  • **
  • Posts: 221
Re: True oil?
« Reply #14 on: September 08, 2021, 12:41:21 PM »
Need a picture fixer upper...

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20689
Re: True oil?
« Reply #15 on: September 08, 2021, 03:31:59 PM »
Or picture posting school..

 :wavey: :laughing: :thumbsup:

Offline oldandslow

  • Trad Bowhunter
  • **
  • Posts: 221
Re: True oil?
« Reply #16 on: September 08, 2021, 03:43:14 PM »
Or picture posting school..

 :wavey: :laughing: :thumbsup:

Too old to learn new tricks   :bigsmyl:

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20689
Re: True oil?
« Reply #17 on: September 08, 2021, 05:43:28 PM »
Heck at 61 yer still just a puppy:)

Offline Eric Krewson

  • Trad Bowhunter
  • **
  • Posts: 3126
Re: True oil?
« Reply #18 on: September 09, 2021, 10:18:30 AM »
I have posted this before; open your bottle of Tru-oil this way, store the bottle upside down and the stuff will last for at least a year before getting gummy.
 

Offline Tim Finley

  • Trad Bowhunter
  • **
  • Posts: 1031
Re: True oil?
« Reply #19 on: September 15, 2021, 10:52:00 AM »
If you are spraying poly why not just use poly only why would you have to do the tru oil .
  There was an thread about using truoil and armor-all it made a beautiful finish a friend tried it on a gun and was very please with it .

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©