Author Topic: Hjarnø bow  (Read 1401 times)

Offline Buemaker

  • Trad Bowhunter
  • **
  • Posts: 3116
Hjarnø bow
« on: September 24, 2021, 07:06:10 AM »
The 7000 year old Hjarnø bow found in Denmark a few years ago. One tip was missing.
https://sketchfab.com/3d-models/mesolithic-bow-from-hjarn-70f092b78ef3410ea5556b2878f980b1

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6564
Re: Hjarnø bow
« Reply #1 on: September 24, 2021, 08:13:53 AM »
 :thumbsup:
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline Flem

  • Trad Bowhunter
  • **
  • Posts: 2985
  • "Don't quote me on that!"
Re: Hjarnø bow
« Reply #2 on: September 24, 2021, 08:49:35 AM »
Damn, thats older than the Earth :smileystooges:

Is it possible to tell the type of wood it was made from? :saywhat:

Offline Buemaker

  • Trad Bowhunter
  • **
  • Posts: 3116
Re: Hjarnø bow
« Reply #3 on: September 24, 2021, 09:15:44 AM »
Elm.

Online mmattockx

  • Trad Bowhunter
  • **
  • Posts: 667
Re: Hjarnø bow
« Reply #4 on: September 24, 2021, 10:23:10 AM »
The 7000 year old Hjarnø bow found in Denmark a few years ago. One tip was missing.
https://sketchfab.com/3d-models/mesolithic-bow-from-hjarn-70f092b78ef3410ea5556b2878f980b1

I would call that a mollegabet bow, but it would seem the Danes had the idea as well.


Damn, thats older than the Earth :smileystooges:

Zing! :o


Mark

Shredd

  • Guest
Re: Hjarnø bow
« Reply #5 on: September 24, 2021, 10:38:25 AM »
 :thumbsup:

Offline Buemaker

  • Trad Bowhunter
  • **
  • Posts: 3116
Re: Hjarnø bow
« Reply #6 on: September 24, 2021, 11:09:12 AM »
The so called Møllegabet is Danish.

Offline Bvas

  • Trad Bowhunter
  • **
  • Posts: 2458
Re: Hjarnø bow
« Reply #7 on: September 24, 2021, 12:30:23 PM »
That’s pretty cool Bue.

I can’t help but wonder what he mighta been hunting way back then.
Some hunt to survive; some survive to hunt

Offline KenH

  • Trad Bowhunter
  • **
  • Posts: 1042
Re: Hjarnø bow
« Reply #8 on: September 24, 2021, 03:44:45 PM »
That's a fabulous find and a great 3D recreation.    Fascinating to me that the Northern Cultures  developed that "lever-tipped" concept rather than the recurve.  Both designs give added energy to the arrow, of course.
Living Aboard the s/v ManCave

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Hjarnø bow
« Reply #9 on: September 24, 2021, 06:30:38 PM »
Very cool bue, Bue.  :thumbsup:
Are there dimensions for it, length, width, lever length, width and thickness?
I have a piece of elm I've been working on that might end up as the Elg Bue using the moose(elg)sinew you sent me. This would be a good design to use as a template.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20689
Re: Hjarnø bow
« Reply #10 on: September 25, 2021, 05:17:38 AM »
Pretty cool...

Offline KenH

  • Trad Bowhunter
  • **
  • Posts: 1042
Re: Hjarnø bow
« Reply #11 on: September 25, 2021, 08:38:32 AM »
PatB -- the only dimensions I could find for the Hjarnø bow are overall length 1.6m, width 5cm, lever 1/3 the length of the working limb...  very close to the dimensions of the Møllegabet find, I believe.  I don't have access to anything other than academia.edu for research papers and it is only mentioned there in passing, not in detail.
Living Aboard the s/v ManCave

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Hjarnø bow
« Reply #12 on: September 25, 2021, 10:03:13 AM »
Thanks Ken. That gives me something to work with.  :thumbsup:
So that about 63"x almost 2". I think my stave is just under that. This might just work out ok.  :thumbsup:
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline KenH

  • Trad Bowhunter
  • **
  • Posts: 1042
Re: Hjarnø bow
« Reply #13 on: September 25, 2021, 11:08:27 AM »
Give it a try Pat.  I've made Møllegabets from boards but not staves, as small as 48" n-t-n.  It's the proportions of lever to working limb and handle length (figure 5" fade to fade) that really matter, IMHO.
Living Aboard the s/v ManCave

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6564
Re: Hjarnø bow
« Reply #14 on: September 25, 2021, 11:37:16 AM »
This is the one Buemaker poste from Denmark.
I took all the metric measurements and changed to English
The top ones, 71" NTN
the bottom one is a modified one. 64" NTN

I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Hjarnø bow
« Reply #15 on: September 25, 2021, 12:02:19 PM »
I think my stave is about 60" +/- but it has a twist. I'll get it down to floor tiller stage, heat the twist out then set it up to the style. This is gonna be a slow process because I want to wait til winter before adding the sinew...plus I have to get my brain back into bow building mode.  :bigsmyl:
Thanks for the help, guys.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Buemaker

  • Trad Bowhunter
  • **
  • Posts: 3116
Re: Hjarnø bow
« Reply #16 on: September 25, 2021, 01:51:00 PM »

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6564
Re: Hjarnø bow
« Reply #17 on: September 25, 2021, 02:55:42 PM »
That's the one I drew up Bue.
Thanks for posting it :thumbsup:
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©