« previous next »
Pages: [1]   Go Down

Author Topic: Bamboo backed bow  (Read 1068 times)

Offline billy dryden

  • Trad Bowhunter
  • **
  • Posts: 84
Bamboo backed bow
« on: October 14, 2021, 10:48:11 PM »
How do you guys do your limb tips on trilams and bamboo back bows. I believe I seen somebody sand on an angle through the bamboo and glue an overlay on.
Logged

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Bamboo backed bow
« Reply #1 on: October 14, 2021, 11:31:01 PM »
Just like you said
Logged
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online Lehtis

  • Trad Bowhunter
  • **
  • Posts: 52
Re: Bamboo backed bow
« Reply #2 on: October 15, 2021, 01:15:36 AM »
Same way but not through all layers, only bamboo and core, perhapps a bit belly also.
Logged

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: Bamboo backed bow
« Reply #3 on: October 15, 2021, 04:57:27 AM »
Just like mad max but I don't file the sides, only the horn overlay and I don't file all the way through the horn.
Logged

Offline billy dryden

  • Trad Bowhunter
  • **
  • Posts: 84
Re: Bamboo backed bow
« Reply #4 on: October 15, 2021, 07:37:53 AM »
I assume I could use Osage as a tip overlay with no problems. I guess it’s better to ask now then find out the hard way!  :biglaugh:
Logged

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Bamboo backed bow
« Reply #5 on: October 15, 2021, 08:20:23 AM »
Someone sent me 64" boo so I had to extend the other 2 lams to get  64" nocks :tongue:
Logged
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: Bamboo backed bow
« Reply #6 on: October 15, 2021, 09:51:22 AM »
Quote from: Mad Max on October 15, 2021, 08:20:23 AM
Someone sent me 64" boo so I had to extend the other 2 lams to get  64" nocks :tongue:

Who the heck would send you 64" boo?
Logged

Offline Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Bamboo backed bow
« Reply #7 on: October 15, 2021, 10:53:06 AM »
Y o u
Logged
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: Bamboo backed bow
« Reply #8 on: October 15, 2021, 10:55:15 AM »
Nah, it had otta shrunk in shippen:)
Logged

Online mmattockx

  • Trad Bowhunter
  • **
  • Posts: 667
Re: Bamboo backed bow
« Reply #9 on: October 15, 2021, 11:52:37 AM »
This is on a maple board bow, but similar to Mad Max's. It is a great way to capture and close off the end grain of the limbs. You don't have to cut across all the layers if you don't want to.




Mark
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©