Author Topic: Grey 2" glass (Read 1810 times)

Bow man · « **on:** October 26, 2021, 01:05:35 PM »

I know this is a long shot but does any happen to have any 2" wide grey fiberglass or know of some one with some. I know it has been discontinued by Gordons a while back and have checked with all the main sources for it and they are all out. We have a customer that is really wanting the grey if we can locate some

kennym · « **Reply #1 on:** October 26, 2021, 01:48:15 PM »

I only have 1.5" in gray... Sorry

Bow man · « **Reply #2 on:** October 26, 2021, 01:59:04 PM »

Quote from: kennym on October 26, 2021, 01:48:15 PM

I only have 1.5" in gray... Sorry

Thanks

Flem · « **Reply #3 on:** October 27, 2021, 10:29:19 AM »

How about a grey veneer under clear glass?

Crooked Stic · « **Reply #4 on:** October 27, 2021, 10:24:07 PM »

What veneer is gray?

Flem · « **Reply #5 on:** October 28, 2021, 08:30:15 AM »

Man made or dyed. Hell, you could use some thin grey fabric or paper. Get creative, if thats your thing and you have a fussy client to satisfy.

Shredd · « **Reply #6 on:** October 28, 2021, 11:06:08 AM »

Quote from: Flem on October 28, 2021, 08:30:15 AM

Man made or dyed. Hell, you could use some thin grey fabric or paper. Get creative, if thats your thing and you have a fussy client to satisfy.

I am not crazy about some of the stuff you come up with but I do appreciate that you think out of the box... Good on Yah, buddy...

mmattockx · « **Reply #7 on:** October 28, 2021, 11:35:09 AM »

Somewhere back a year or so there was discussion about using coloured/patterned rice paper under clear lams to increase the artistic options on a bow. That sort of method would work fine to give grey limbs as well. I did some searching for it but came up empty this morning.

Mark

Flem · « **Reply #8 on:** October 28, 2021, 12:10:24 PM »

" I am not crazy about some of the stuff you come up with but I do appreciate that you think out of the box... Good on Yah, buddy..."

Last time I looked there was no room left in that box.

Quote from: mmattockx on October 28, 2021, 11:35:09 AM

Somewhere back a year or so there was discussion about using coloured/patterned rice paper under clear lams to increase the artistic options on a bow. That sort of method would work fine to give grey limbs as well. I did some searching for it but came up empty this morning.

Mark

Guess who

Shredd · « **Reply #9 on:** October 28, 2021, 02:34:16 PM »

I am not sure rice paper is the answer for this... A standard thickness paper colored gray would work... The rice paper I worked with is thin and gets mostly transparent when wet out with resin... It would be good with a design or logo printed on it and you would to see the wood grain underneath it...

Mad Max · « **Reply #10 on:** October 28, 2021, 03:36:07 PM »

Left, green dye on maple core--center, 1963 Damon Howatt recurve with Green Thermo glass --Right , green dye under glass.
As you can see not even close when glued to glass.
It would take a lot of trial and error to get it right.

Longcruise · « **Reply #11 on:** October 28, 2021, 05:26:39 PM »

Would this work?

https://www.dyed-veneer.com/product-p/z-7307-23.htm

Longcruise · « **Reply #12 on:** October 28, 2021, 05:32:11 PM »

I've used the pink and blue under bear paw clear and was very happy with it.

Flem · « **Reply #13 on:** October 28, 2021, 05:45:19 PM »

Somebody left the door to the box open

Crooked Stic · « **Reply #14 on:** October 28, 2021, 06:04:26 PM »

Good luck dont think its gonna be the same.
Might need test strips to show your customer

Flem · « **Reply #15 on:** October 29, 2021, 09:14:12 AM »

Pretty sure we lost Bowman here, don't think he really gives a Rats A$$ about all these wacko suggestions.

Once again we are having a discussion amongst ourselves for the sake of posterity.

Bow man · « **Reply #16 on:** October 29, 2021, 10:15:22 AM »

Thanks for throwing out ideas we already have a back up plan if no grey glass is found

Flem · « **Reply #17 on:** October 29, 2021, 02:50:32 PM »

Something else you could do, would be to put an epoxy gel coat on the back side of some clear glass.

Mad Max · « **Reply #18 on:** October 29, 2021, 03:24:44 PM »

Rattle can of grey glass

Flem · « **Reply #19 on:** October 29, 2021, 03:50:52 PM »

That would work also

News:

Author Topic: Grey 2" glass (Read 1810 times)

Shredd

Shredd

Users currently browsing this topic: