« previous next »
Pages: [1]   Go Down

Author Topic: Takedown Recurve stack help  (Read 818 times)

Offline GingerStick

  • Trad Bowhunter
  • **
  • Posts: 7
Takedown Recurve stack help
« on: January 27, 2022, 05:16:49 PM »
Going to try my hand at building a set of recurve limbs. I've built a few takedown longbows but I am unsure of what to use for my stack for the recurve as far as parallels and tapers are concerned . Gonna try for a 58" with a 16" riser and 45#@28
Any help be appreciated
Thanks!
Logged

Online Longcruise

  • Trad Bowhunter
  • **
  • Posts: 1335
Re: Takedown Recurve stack help
« Reply #1 on: February 02, 2022, 11:33:38 AM »
I got no idea.  Just bringing this TT :thumbsup:
Logged
"Every man is the creature of the age in which he lives;  very few are able to raise themselves above the ideas of the time"     Voltaire

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: Takedown Recurve stack help
« Reply #2 on: February 02, 2022, 12:03:27 PM »
I only build d/r longbows but if no curve builders show up I can take a SWAG at it . LOL
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline Appalachian Hillbilly

  • Trad Bowhunter
  • **
  • Posts: 661
Re: Takedown Recurve stack help
« Reply #3 on: February 02, 2022, 12:50:37 PM »
I have a 58" inch recurve with ILF limbs . I will verify when I get home but they are 40 lb with 2 tapers at 1 thou each. Tapers were 60 though, glass was 40 thou for a stack of 200 with .002 per inch total taper.

That is going from memory on those limbs. Trad Tech Blackmax 2.0

They are 40 lbs on a 17" riser with a 15 degree limb pads
« Last Edit: February 02, 2022, 01:04:15 PM by Appalachian Hillbilly »
Logged

Offline JGR1269

  • Trad Bowhunter
  • **
  • Posts: 329
Re: Takedown Recurve stack help
« Reply #4 on: February 02, 2022, 12:55:05 PM »
I used to build takedown recurves 25 years ago. I have all the data saved but there are a lot of variables like riser length, wedge length, limb design etc. I think Binghams has some info on their site that might help you out.
Logged

Online Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Takedown Recurve stack help
« Reply #5 on: February 02, 2022, 06:43:22 PM »
No one can give you a stack thickness but the Bowyer that made them, you will have to build a pair of limbs and find out what # it is and then we can help.
Anything else will be a guess, you may get lucky and get something close, like 5# close :dunno:
Logged
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©