« previous next »
Pages: [1] 2 3 ... 5   Go Down

Author Topic: Working on a shorter shortie ? (Braced)  (Read 6012 times)

Online Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Working on a shorter shortie ? (Braced)
« on: February 05, 2022, 08:00:20 PM »
Copying Kenny Topic, kind of

It's a glass copy of a Korean Horn Bow
48/50" NTN--- 1-1/2" wide
Butt load of reflex , hope she ain’t too squirrelly
I will be using Stable Kore under the back glass


Going top less, James gave me some Mule tape and a form tracing


The main riser is 5/8" thick, it will have over and under lays on it to make it thicker


Got all the steel pins cut and on the form

« Last Edit: February 14, 2022, 07:36:52 PM by Mad Max »
Logged
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: Working on a shorter shortie ?
« Reply #1 on: February 05, 2022, 08:13:40 PM »
Cool!
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Online Crooked Stic

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6075
Re: Working on a shorter shortie ?
« Reply #2 on: February 05, 2022, 08:35:50 PM »
Ya might want stablecore x2
Logged
High on Archery.

Online Longcruise

  • Trad Bowhunter
  • **
  • Posts: 1335
Re: Working on a shorter shortie ?
« Reply #3 on: February 05, 2022, 08:38:25 PM »
Or some hex.
Logged
"Every man is the creature of the age in which he lives;  very few are able to raise themselves above the ideas of the time"     Voltaire

Online KenH

  • Trad Bowhunter
  • **
  • Posts: 1042
Re: Working on a shorter shortie ?
« Reply #4 on: February 05, 2022, 10:48:55 PM »
Good luck, Max!  Korean hornbows can be squirrely; I hope your version isn't too bad...   

I made a glass copy of a 48" NTN Scythian once upon a time.  Worked great except when it randomly decided to turn itself inside out upon release!
Logged
Living Aboard the s/v ManCave

Offline Pointed_stick

  • Trad Bowhunter
  • **
  • Posts: 114
Re: Working on a shorter shortie ?
« Reply #5 on: February 06, 2022, 12:09:24 AM »
Looking forward to watching this come together!
Logged
"All mushrooms are edible, some of them only once" a wise man aka Dave

Online Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Working on a shorter shortie ?
« Reply #6 on: February 06, 2022, 07:07:31 AM »
Quote from: KenH on February 05, 2022, 10:48:55 PM
Good luck, Max!  Korean hornbows can be squirrely; I hope your version isn't too bad...   

I made a glass copy of a 48" NTN Scythian once upon a time.  Worked great except when it randomly decided to turn itself inside out upon release!

James said it would be a test for me :banghead:
Logged
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online KenH

  • Trad Bowhunter
  • **
  • Posts: 1042
Re: Working on a shorter shortie ?
« Reply #7 on: February 06, 2022, 08:20:25 AM »
Here's hoping you pass the test with flying colors!
Logged
Living Aboard the s/v ManCave

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: Working on a shorter shortie ?
« Reply #8 on: February 06, 2022, 08:34:48 AM »
I think you can do it no prob! :thumbsup:
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Online OldRawhide42

  • Trad Bowhunter
  • **
  • Posts: 240
Re: Working on a shorter shortie ?
« Reply #9 on: February 06, 2022, 09:11:40 AM »
Max what diameter are your pins and how far apart are thay ?

Logged

Shredd

  • Guest
Re: Working on a shorter shortie ?
« Reply #10 on: February 06, 2022, 11:08:39 AM »
 Butt Load of Reflex??  Is that a technical term??   :)

 Love it... Best of Luck on this endeavor... I appreciate your appetite to reach out and do different stuff...
Logged

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Working on a shorter shortie ?
« Reply #11 on: February 06, 2022, 11:52:28 AM »
Mark, I've seen and shot a few similar bows that James built and I must say they were quite fast. At least it should be pretty stable unlike most Asiatic horn bows that you have to keep tweaking due to heat and humidity.
Logged
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20685
Re: Working on a shorter shortie ?
« Reply #12 on: February 06, 2022, 12:29:40 PM »
How long this gonna take?

 :laughing: :laughing: :thumbsup:
Logged

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: Working on a shorter shortie ?
« Reply #13 on: February 06, 2022, 12:43:40 PM »
Now Roy, ya gotta give him some time with his shortie... :biglaugh:
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline Buemaker

  • Trad Bowhunter
  • **
  • Posts: 3116
Re: Working on a shorter shortie ?
« Reply #14 on: February 06, 2022, 01:32:28 PM »
Yes, a shortie can easily turn into a longie.  Will follow this one Max.
Logged

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Working on a shorter shortie ?
« Reply #15 on: February 06, 2022, 03:47:14 PM »
Don't give him too much time on his shorty.   :bigsmyl:  I've heard it can make you go blind.  :o
Logged
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: Working on a shorter shortie ?
« Reply #16 on: February 06, 2022, 03:54:06 PM »
Roy says he stopped when he needed glasses...  :laughing:
« Last Edit: February 06, 2022, 04:52:09 PM by kennym »
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Online Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Working on a shorter shortie ?
« Reply #17 on: February 06, 2022, 06:26:18 PM »
Quote from: OldRawhide42 on February 06, 2022, 09:11:40 AM
Max what diameter are your pins and how far apart are thay ?

1/2" pins, for a long bow 2-1/2" apart
The first 6 from the middle are 2" apart then they get closer, I went overboard there on the recurve ends.

Thanks Guy's
Logged
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Working on a shorter shortie ?
« Reply #18 on: February 06, 2022, 06:30:17 PM »
Quote from: Shredd on February 06, 2022, 11:08:39 AM
Butt Load of Reflex??  Is that a technical term??   :)

 Love it... Best of Luck on this endeavor... I appreciate your appetite to reach out and do different stuff...

Yeah, I'm just stupid like that :bigsmyl: :laughing:
« Last Edit: February 06, 2022, 07:00:41 PM by Mad Max »
Logged
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Online OldRawhide42

  • Trad Bowhunter
  • **
  • Posts: 240
Re: Working on a shorter shortie ?
« Reply #19 on: February 06, 2022, 07:01:20 PM »
Thanks Max
Logged
Pages: [1] 2 3 ... 5   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©