Author Topic: All fired up (Read 13396 times)

Appalachian Hillbilly · « **Reply #20 on:** March 13, 2022, 07:32:38 PM »

Can you add trans tint dyes to EA40?

Mad Max · « **Reply #21 on:** March 13, 2022, 07:52:43 PM »

Quote from: Appalachian Hillbilly on March 13, 2022, 07:32:38 PM

Can you add trans tint dyes to EA40?

The dyes I ordered were recommended by Smooth On

Kirkll · « **Reply #22 on:** March 13, 2022, 09:44:21 PM »

Quote from: Appalachian Hillbilly on March 13, 2022, 07:32:38 PM

Can you add trans tint dyes to EA40?

Absolutely.... just be careful not to over do it. too much pigment can reduce the strength of the epoxy..... And.... its messy! You really don't realize how much epoxy gets on other things until you mix up black pigment EA 40.

KenH · « **Reply #23 on:** March 14, 2022, 07:06:27 AM »

NUTHIN' wrong with 45" NTN, Max. That's gonna be a super bow for tight places! Lookin' good in blue, too -- Turkish horn bows were usually painted in fairly bright colors -- red & gold, blue & silver, etc.

Mad Max · « **Reply #24 on:** March 14, 2022, 09:25:33 AM »

Kirkll · « **Reply #25 on:** March 14, 2022, 04:11:01 PM »

So what type of core are you using on this thing... I just cant imagine how to keep something like this stable without it flipping over on you... This is pretty wild.... Kirk

Mad Max · « **Reply #26 on:** March 14, 2022, 05:08:17 PM »

This one is similar, the string loop is 3" long, this loop straddling the lever will help keep it in check
Carbonized boo floor, I may use Stabil kore too

Mad Max · « **Reply #27 on:** March 19, 2022, 05:50:41 PM »

Feeling much better today, coughing and coughingggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggggg.

First thing I did today was shoot the riser across the room trying to sand the fades, only 5/8" thick and 10" long so I made it again.

All glued up and in the hot box

I'm liking these topless forms

Flem · « **Reply #28 on:** March 19, 2022, 06:17:02 PM »

I've heard you have to cough to get off, whatever that means

Looks like your heat box could double as a tanning bed, and I'm just glad the topless thing is not human

Mad Max · « **Reply #29 on:** March 19, 2022, 06:22:28 PM »

Mad Max · « **Reply #30 on:** March 21, 2022, 07:36:34 PM »

This bow is very light in the hand, I had to weight it 7oz.

No stabil kore on this one
.160 stack, 1-1/8" wide limbs, 45"NTN 26#@28" 9-1/4"of reflex
I figured it would be 40# with it being so short.

Here you go shredd --I used this to figure out how long my string needs to be

Siyahs are 6" long, 3/8" wide between the loops

Buffalo Horn tip side overlays
Still need to glue on a leather bridge under the Y on the loops

About 6-1/4" braced

Full draw at 28" top 29" bottom

Shredd · « **Reply #31 on:** March 21, 2022, 09:55:11 PM »

Thanks Mark... Good Tip... Bow looks good... Pretty extreme...

Mad Max · « **Reply #32 on:** March 21, 2022, 10:10:39 PM »

KenH · « **Reply #33 on:** March 21, 2022, 10:12:22 PM »

LOVELY! Beautiful profile and draw!

onetone · « **Reply #34 on:** March 21, 2022, 11:59:28 PM »

Very cool bow! I like dark sides at the string notches - nice visual detail.

Mad Max · « **Reply #35 on:** March 22, 2022, 12:24:02 AM »

Thanks guy's

Pat B · « **Reply #36 on:** March 22, 2022, 09:17:11 AM »

Looking good, Mark. Bring this to the Classic too.

Mad Max · « **Reply #37 on:** March 22, 2022, 09:28:24 AM »

will do pat

Flem · « **Reply #38 on:** March 22, 2022, 02:17:59 PM »

Wow!!! 7oz is amazingly lite. You could carry that thing for days on end and never wear out.

onetone · « **Reply #39 on:** March 22, 2022, 05:08:46 PM »

Max is the NTN bow measurement along the back surface of the bow?

News:

Author Topic: All fired up (Read 13396 times)

Shredd

Users currently browsing this topic: