3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Trying to convert to a tab  (Read 1171 times)

Online Wheels2

  • Trad Bowhunter
  • **
  • Posts: 1040
Trying to convert to a tab
« on: August 24, 2022, 08:12:36 PM »
I have been trying to convert to a tab so as to be more consistant.  I have tried a Black Widow and a Yost.  Both cordovan.
I drag my ring finger badly so even with a glove I have a pronounced callus.
With a tab, I am getting bad tail right arrow flight.  Right handed shooter.  I have tried normal hook and deep hook.
Any suggestions that I can try?
Super Curves.....
Covert Hunter Hex9h
Morrison Max 6 ILF
Mountain Muffler strings to keep them quiet
Shoot as much weight as you can with accuracy

Offline Orion

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8252
  • Contributing Member
Re: Trying to convert to a tab
« Reply #1 on: August 24, 2022, 08:31:54 PM »
Your draw arm elbow is probably too high.  Lower it and you shouldn't have any additional wear on your third finger whether you use a tab or glove. 

Offline GCook

  • Trad Bowhunter
  • **
  • Posts: 2040
Re: Trying to convert to a tab
« Reply #2 on: August 24, 2022, 09:30:03 PM »
A glove???  :bigsmyl:
I can afford to shoot most any bow I like.  And I like Primal Tech bows.

Online Wheels2

  • Trad Bowhunter
  • **
  • Posts: 1040
Re: Trying to convert to a tab
« Reply #3 on: August 25, 2022, 07:13:51 AM »
I will try lowering my draw arm.  Going to shoot shortly.
Super Curves.....
Covert Hunter Hex9h
Morrison Max 6 ILF
Mountain Muffler strings to keep them quiet
Shoot as much weight as you can with accuracy

Online The Whittler

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2866
Re: Trying to convert to a tab
« Reply #4 on: August 25, 2022, 08:58:13 AM »
2nd Orion.

Online MnFn

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2965
Re: Trying to convert to a tab
« Reply #5 on: August 25, 2022, 09:09:31 AM »
I think Terry Green had a post on here about when he starts his draw. I could be wrong but whoever it was, they don’t start the draw with even pressure on all three fingers. The middle fingers has more.  Probably not saying that exactly right, but you should be able to search for the posting.

That might help you.
"By the looks of his footprint he must be a big fella"  Marge Gunderson (Fargo)
 
"Ain't no rock going to take my place". Luke 19:40

Online BAK

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 1773
Re: Trying to convert to a tab
« Reply #6 on: August 25, 2022, 09:18:52 AM »
I wish you luck.  The best shot I ever hung with shot 3 under with a tab.   I tried and tried to make it work and finally gave up and stuck with the glove.   :o
"May your blood trails be short and your drags all down hill."

Online McDave

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6077
Re: Trying to convert to a tab
« Reply #7 on: August 25, 2022, 09:30:08 AM »
I don't know if you shoot split or 3 under, but in my experience a lot of problems like you are experiencing with a tab tend to resolve easier when shooting 3 under.  3 under tabs are much simpler by design, and just placing three fingers together on the string seems to simplify grip issues.  YMMV, of course; lots of people are happier shooting split.

Your tail right issue could be a symptom of alignment problems starting with not transferring to the back muscles, leading to not getting the drawing elbow behind the arrow, leading to a tense drawing hand, leading to a bad release.  Easier fo work these things out with a lower poundage bow.  Hard to tell if any of these problems exist without watching you shoot.
TGMM Family of the Bow

Technology....the knack of arranging the world so that we don't have to experience it.

Online Wheels2

  • Trad Bowhunter
  • **
  • Posts: 1040
Re: Trying to convert to a tab
« Reply #8 on: August 30, 2022, 04:16:16 PM »
If I didn't make it clear,  3 under.  I have tried a Black Widow, Yost, and a Barbee is coming this week.
Even with concentration on back tension,draw arm elbow aligned,  it is still an issue.
Super Curves.....
Covert Hunter Hex9h
Morrison Max 6 ILF
Mountain Muffler strings to keep them quiet
Shoot as much weight as you can with accuracy

Online Kirkll

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 2366
Re: Trying to convert to a tab
« Reply #9 on: August 30, 2022, 09:54:47 PM »
I had issues trying to get used to a tab myself with similar issues. I gave up on store bought tabs and started building my own that fit my fingers just right. If the tab is too large you have drag issues like you described, it the tab is too small you get finger contact. I finally had a guy custom build one for me..... With that being said... i still hunt with a glove.

What i found helpful was going back and forth between a soft glove and a tab and getting the finger placement on the tab the same as the glove. Once ya get that down you can shoot either way.  Look up Terry's post on finger placement. That was good stuff.  You can apply the same method of finger placement on a tab. Stay away from a deep hook, and use your finger tips properly.    Kirk
Big Foot Bows
Traditional Archery
[email protected]
http://bigfootbows.com/b/bows/

Online MnFn

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2965
Re: Trying to convert to a tab
« Reply #10 on: August 31, 2022, 02:50:48 PM »
 Me too.  What I want to know is how do keep track of them?  I’m always losing them.
"By the looks of his footprint he must be a big fella"  Marge Gunderson (Fargo)
 
"Ain't no rock going to take my place". Luke 19:40

Offline Sam McMichael

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6873
Re: Trying to convert to a tab
« Reply #11 on: August 31, 2022, 05:57:22 PM »
I never had any trouble at all changing over to a tab. Putting it more accurately, I don't shoot any worse with the tab than I did with a glove.
Sam

Offline Wudstix

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6299
  • Wood arrows & D/R Longbows Rule!!!
Re: Trying to convert to a tab
« Reply #12 on: August 31, 2022, 06:17:47 PM »
For me, kinda like switching from recurve to longbow, takes about a dozen shoots.  Tab is smoother for me, but I shoot glove OK.  As far as keeping track of a tab, buy three and you'll never misplace the first one!!!
 :campfire: :coffee: :archer2: :campfire:
"If you're not living on the edge, you're taking up too much space!!!" - Me

Psalms 121: 1-3 - King David

60" Big River 67#@28"              
60" MOAB D/R LB 62#@27"
60" Big River D/R LB 65#@27"
62" Kota Badlands LB 72#@28"
62" Howatt TD 62#@28
58” Bear Grizzly 70#@28”
62" Big River D/R LB 60#@30"
66" Moosejaw Razorback LB 60#@28"

"Memento Mori"
PBS - Associate Member
Retired DoD Civ 1985-2019

Online Wheels2

  • Trad Bowhunter
  • **
  • Posts: 1040
Re: Trying to convert to a tab
« Reply #13 on: September 01, 2022, 07:02:06 AM »
Well, I have tried Bateman, Black Widow, Yost, and as of yesterday, a Barbee Death Adder.  So far in m very limited shooting, the Barbee has shown only a little of the tail left problem.
This tab stuff is getting expensive.
Super Curves.....
Covert Hunter Hex9h
Morrison Max 6 ILF
Mountain Muffler strings to keep them quiet
Shoot as much weight as you can with accuracy

Offline Wild Bill MCP 808

  • Trad Bowhunter
  • **
  • Posts: 227
Re: Trying to convert to a tab
« Reply #14 on: September 04, 2022, 11:57:21 PM »
Wheels 2 go on youtube and search how to properly fit a tab. It may help, but I think if you just continue shooting a little each day the problem will resolve itself. Good Luck!
Traditional Bowhunters of Maryland
60" Black Widow 47@ 28
60" Thunderhorn 50@ 28
62" Thunderhorn 50@ 28
60" Black Widow  46@ 28 
NRA Member
Bill Wilhelm

Offline Wudstix

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6299
  • Wood arrows & D/R Longbows Rule!!!
Re: Trying to convert to a tab
« Reply #15 on: September 07, 2022, 12:08:17 AM »
Contact Death Adder and they will get you properly fitted and rocking.
 :campfire: :coffee: :archer2: :campfire:
"If you're not living on the edge, you're taking up too much space!!!" - Me

Psalms 121: 1-3 - King David

60" Big River 67#@28"              
60" MOAB D/R LB 62#@27"
60" Big River D/R LB 65#@27"
62" Kota Badlands LB 72#@28"
62" Howatt TD 62#@28
58” Bear Grizzly 70#@28”
62" Big River D/R LB 60#@30"
66" Moosejaw Razorback LB 60#@28"

"Memento Mori"
PBS - Associate Member
Retired DoD Civ 1985-2019

Offline Terry Green

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 28640
Re: Trying to convert to a tab
« Reply #16 on: September 07, 2022, 07:43:08 AM »
Wheels, don't take this wrong... if you got callouses, a tab or glove is only a band aid for an issue and not the cure.

You got a too high elbow or you are torquing the string.... sounds like the latter to me if you are getting tail kick....

And yes, I'm the one that posted about 'pre set staggered fingers'.

Anyway.... wish you the best in figuring it out.

Take care....  :campfire:
Tradbowhunting Video Store - https://digitalstore.tradgang.com/

Tradgang Bowhunting Merchandise - https://tradgang.creator-spring.com/?

Tradgang DVD - https://www.tradgang.com/tgstore/index.html

"It's important,  when going after a goal, to never lose sight of the integrity of the journey" - Andy Garcia

'An anchor point is not a destination, its  an evolution to conclusion'

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©