Author Topic: Anybody Hydro-dipped Border Covert Hunter limbs?  (Read 1697 times)

Offline bayrunner

  • Trad Bowhunter
  • **
  • Posts: 12
Anybody Hydro-dipped Border Covert Hunter limbs?
« on: November 16, 2022, 02:48:04 PM »
I am thinking about hydro-dipping a camo pattern on a set of Border Covert Hunter Hex 9 limbs. Border told me "don't expose them to a Hydro dip as we have no idea how that would affect them". I do not know what "affect them" means - performance or integrity.

Has anybody hydro-dipped a set of Broder limbs and found any "affect". I hate to ruin a new set of limbs.

 

Offline Buemaker

  • Trad Bowhunter
  • **
  • Posts: 3116
Re: Anybody Hydro-dipped Border Covert Hunter limbs?
« Reply #1 on: November 16, 2022, 03:24:43 PM »
Hydro dip??

Offline Mark R

  • Trad Bowhunter
  • **
  • Posts: 503
Re: Anybody Hydro-dipped Border Covert Hunter limbs?
« Reply #2 on: November 16, 2022, 03:55:25 PM »
I don't think dipping them should affect them at all, from what I understand its a coloring solution floating in water, but Border could void any guaranty if you alter them, ask the people who do the dip. 
« Last Edit: November 16, 2022, 04:00:56 PM by Mark R »

Offline bayrunner

  • Trad Bowhunter
  • **
  • Posts: 12
Re: Anybody Hydro-dipped Border Covert Hunter limbs?
« Reply #3 on: November 16, 2022, 06:21:08 PM »
Thank you for the replies. Although the bow is only about 4 months old, I believe the warranty is already voided since I bought the bow second hand, that is I am not the original owner. Yes - hydro-dipping is how a camo pattern is added to guns and bows. 

Online Longcruise

  • Trad Bowhunter
  • **
  • Posts: 1335
"Every man is the creature of the age in which he lives;  very few are able to raise themselves above the ideas of the time"     Voltaire

Online Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Anybody Hydro-dipped Border Covert Hunter limbs?
« Reply #5 on: November 17, 2022, 07:51:57 AM »
You have to sand and spray a primer on it before dipping.
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline bayrunner

  • Trad Bowhunter
  • **
  • Posts: 12
Re: Anybody Hydro-dipped Border Covert Hunter limbs?
« Reply #6 on: November 17, 2022, 09:10:12 AM »
My guess is Border is more worried about how the primer may chemically react or degrade the original finish on the limbs rather than performance of the limbs. I will probably just knock down the gloss a bit with steel wool and live with metallic look of the limbs. It also saves me about $200 bucks as well.  Thank you for the responses to date. Cheers.

Online Kirkll

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 2416
Re: Anybody Hydro-dipped Border Covert Hunter limbs?
« Reply #7 on: November 19, 2022, 09:20:28 PM »
Border has more warranty loopholes than any other bow manufacturer out there, and I know quite a few of their customers that had issues too.

But it you bought it second hand, it doesn’t  matter anyway warranty wise.

You shouldn’t have any problems dipping those limbs, or any limbs that are sealed well at all.   Kirk
Big Foot Bows
Traditional Archery
[email protected]
http://bigfootbows.com/b/bows/

Online Longcruise

  • Trad Bowhunter
  • **
  • Posts: 1335
Re: Anybody Hydro-dipped Border Covert Hunter limbs?
« Reply #8 on: November 20, 2022, 01:02:22 PM »
Here's another option for limbs.  I've not used them but have a set gathering dust.

https://onestringer.com/limbsations/
"Every man is the creature of the age in which he lives;  very few are able to raise themselves above the ideas of the time"     Voltaire

Online Mad Max

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6565
Re: Anybody Hydro-dipped Border Covert Hunter limbs?
« Reply #9 on: November 20, 2022, 05:08:26 PM »
My guess is Border is more worried about how the primer may chemically react or degrade the original finish on the limbs rather than performance of the limbs. I will probably just knock down the gloss a bit with steel wool and live with metallic look of the limbs. It also saves me about $200 bucks as well.  Thank you for the responses to date. Cheers.

If you just want the gloss gone, rub it down with 0000 steel wool and then rub it as hard as you can with this, I've done it many times.
https://www.3m.com/3M/en_US/p/dc/v000298702/


For anyone , after you spray your bow with what ever clear finish and it has dust particles or over spray on it , rub it hard with these pads and it will be slick. :thumbsup:
I would rather fail at something above my means, than to succeed at something  beneath my means  
}}}}===============>>

Offline Jeff tech

  • Trad Bowhunter
  • **
  • Posts: 99
Re: Anybody Hydro-dipped Border Covert Hunter limbs?
« Reply #10 on: November 20, 2022, 07:51:10 PM »
White scotch Brite. It what we would use to take over spray off glass or Chrome 👍 very fine.

Online onetone

  • Trad Bowhunter
  • **
  • Posts: 431
Re: Anybody Hydro-dipped Border Covert Hunter limbs?
« Reply #11 on: November 20, 2022, 11:30:53 PM »
I use those white eraser sponges DRY for knocking the gloss off a final finish … works fine lasts a long time.  :thumbsup:

Offline bayrunner

  • Trad Bowhunter
  • **
  • Posts: 12
Re: Anybody Hydro-dipped Border Covert Hunter limbs?
« Reply #12 on: November 21, 2022, 04:48:51 PM »
All good comments - thanks. I was thinking about the steel wool option to take down the sheen on both riser and limbs but the original finish on the limbs appears to be so thin I would likely remove it in places. The original finish on the riser can be chipped off with my fingernail (long story). I have scheduled to have the entire bow refinished with a dull to satin sheen by a competent bowyer in the USA this coming January. It's too pretty to hydro-dip and I like its draw curve and performance with heavy arrows. In the meantime, I will keep shooting it and hope I am not throwing good money after bad - if that is the correct way to say it. 

Offline Jeff tech

  • Trad Bowhunter
  • **
  • Posts: 99
Re: Anybody Hydro-dipped Border Covert Hunter limbs?
« Reply #13 on: November 21, 2022, 05:24:01 PM »
It might be just me but I do not like using 0000 steel wool. I would much rather use Scotch Brite white being the finest white then gray then red. You'd leave no steel particles in the finish, future Rust particles, or little tiny black specks that get into the wood grain.. Especially something that you're going to hold in your hand. Maybe for household moldings and handrails. Steel wool is fine. But not when I'm doing something that I'm going to look close at, like in my hand. Scotch Brite 👌JF

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©