Author Topic: 2023 Bow Swap Progress Thread - Complete (Read 52617 times)

Roy from Pa · « **Reply #80 on:** February 10, 2023, 03:46:32 PM »

Sorry to hear that, Dan...

rainman · « **Reply #81 on:** February 10, 2023, 05:23:53 PM »

Quote from: Buemaker on February 10, 2023, 03:33:37 PM

Off topic, but are you getting injections for this? My wife works in the «eye section» of a hospital and that is why I have heard about this illness. Some people are getting injections in the eyes every 4 weeks.

no one had said anything about this. Perhaps it has to get worse. It is only in the right eye.

Buemaker · « **Reply #82 on:** February 10, 2023, 06:06:42 PM »

rainman, sent you a PM

EvilDogBeast · « **Reply #83 on:** February 11, 2023, 01:01:01 AM »

Working on it Dan

Those who are currently AFK, be advised. I will start reaching out to you for updates this weekend if you haven't posted in a while.

kennym · « **Reply #84 on:** February 11, 2023, 08:02:52 AM »

Update-- Should gloo up the victims first bow attempt this coming week

Crooked Stic · « **Reply #85 on:** February 11, 2023, 03:54:24 PM »

My update is first limb under pressure.

Jon Lipovac · « **Reply #86 on:** February 11, 2023, 07:37:58 PM »

Got some riser and wedge wood under vacuum for 5 days and letting them soak without vacuum while we are on vacation.

Before we left my aluminum stick also showed up for the :banghead:adjustable test riser I want to make.

Looking forward to getting back to work on it all.

Crooked Stic · « **Reply #87 on:** February 11, 2023, 08:59:42 PM »

Pretty big chunk of aluminum be interesting tosee what you do with that.

Jon Lipovac · « **Reply #88 on:** February 12, 2023, 12:43:57 PM »

Quote from: Crooked Stic on February 11, 2023, 08:59:42 PM

Pretty big chunk of aluminum be interesting tosee what you do with that.

Haha. I’m pretty interested too.
I’ve got some drawings made up and gonna mill a mock up out of wood before I dig into the aluminum.
My idea’s definitely don’t manifest the way I think they will every time.😁

Crooked Stic · « **Reply #89 on:** February 12, 2023, 02:00:40 PM »

I got to ask you said wood vac for five days. Did it take that long for the bubbles to quit ? What species of wood?

Jon Lipovac · « **Reply #90 on:** February 12, 2023, 03:19:00 PM »

Curly maple.
(3) 1x4x20
(1) 3/4 x 2x 20
It was still bubbling ever so slightly yet. But was leaving on vacation for 6 days and didn’t want to leave it unattended for that long. I’ve had good results with most woods even though I have probably stopped a little short of complete air evacuation. Since I done put color in the resin, it’s hard to tell the level of saturation I get.
I’ve noticed that all the Maple I’ve stabilized sinks like a rock and gains significant weight.

Crooked Stic · « **Reply #91 on:** February 12, 2023, 03:41:57 PM »

That is my experience with Maple also. Soaks so much it don't float. And with color get completely thru even 8/4 pieces. What I been told is the specific gravity of the wood determines if it floats or no and has nothing to do with complete penetration.

4 point · « **Reply #92 on:** February 12, 2023, 08:43:33 PM »

Ready to drill some holes.

Crooked Stic · « **Reply #93 on:** February 12, 2023, 09:44:23 PM »

Your victim gonna be happy.

4 point · « **Reply #94 on:** February 12, 2023, 10:58:28 PM »

Thanks Mike, I hope they like it.

Crooked Stic · « **Reply #95 on:** February 13, 2023, 05:38:17 PM »

#2 under pressure. Hoping the weight is right.

Crooked Stic · « **Reply #96 on:** February 14, 2023, 11:25:06 AM »

I made a boo boo. using straight taper wedge and got one upside down. If they tiller and hit weight could call it a character flaw ? what you all think?

stickmonkey · « **Reply #97 on:** February 14, 2023, 04:40:19 PM »

Either way it will be interesting to see the outcome!

Roy from Pa · « **Reply #98 on:** February 14, 2023, 05:23:33 PM »

Stickypops your hose looks to be a little limp..

I'd finish the bow and see how it goes.

Crooked Stic · « **Reply #99 on:** February 14, 2023, 07:44:43 PM »

That aint the half of it drilled one limb only to find out Iforgot to flip my drill block to the curve side. Easy fix with plugs and overlays but

News:

Author Topic: 2023 Bow Swap Progress Thread - Complete (Read 52617 times)

Users currently browsing this topic: