In an effort to get the ball rolling with a carbon arrow test kit, I've put the following shafts and points together for a "kit starter" ...
All arrows pictured are 29" long as measured from the nock throat to the shaft tube end - feathered arrows use a 4" left wing 75x105 4-fletch.
From top to bottom -
AD fletched tapered Trad Lite w/alum ferrule - 347 grains
AD fletched tapered Trad w/alum ferrule - 377 grains
AD bare tapered Trad w/alum ferrule - 360 grains
Beman fletched ICS Venture 500 w/100 grain brass ferrule, 333 grains
Beman fletched ICS Venture 500 w/alum ferrule, 256 grains
Beman bare ICS Venture 500 fletched w/alum ferrule, 242 grains
Screw-in points - 100, 125, 145, 175, 200 grains.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
RULES1. Shoot the arrows into a worthy butt/backstop so we don't break or lose any to the testing process.
2. If there are others wishing to use the kit, the kit must be mailed out to the new tester within 10 days.
3. Use this thread as the running list of users - first post, first served.
4. If you can, add a carbon arrow to the kit! Arrows can be any length, fletched or unfletched, and must have a screw-in adapter in order to vary point weights. Please add your arrow data to the arrow data sheet contained in the kit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Test Kit User List1. BullMtnArtworks - Member # 10962 <-- shipped out kit on 5/14/08
2. gsdmikko - Member # 15441
3. Kevin L. - Member # 4270
4. dagwood64 - Member # 14517
5. Bmac - Member # 15209
6. Greg Sz. - Member # 16199
7. kolt - Member # 4376
8. fyrfyter43 - Member # 13079