Author Topic: One piece recurve. (Read 9221 times)

Crooked Stic · « **Reply #60 on:** May 15, 2023, 12:04:53 PM »

Ok this is all you get. just a twidge over 28. i cant see a lot I would change. What you guys think

Stagmitis · « **Reply #61 on:** May 15, 2023, 01:07:42 PM »

What kind of finish you using there Kirk?

Bryan Adolphe · « **Reply #62 on:** May 15, 2023, 01:23:46 PM »

I think it looks awesome Mike, bending pretty nice for my inexperience eyes!

kennym · « **Reply #63 on:** May 15, 2023, 01:30:43 PM »

Mad Max · « **Reply #64 on:** May 15, 2023, 02:01:29 PM »

Quote from: Crooked Stic on May 15, 2023, 12:04:53 PM

Ok this is all you get. just a twidge over 28. i cant see a lot I would change. What you guys think

I wanted to see how much it looks like mine---Nice stic

onetone · « **Reply #65 on:** May 15, 2023, 03:08:02 PM »

Lookin fine Stic!

Crooked Stic · « **Reply #66 on:** May 15, 2023, 03:45:46 PM »

Max your tips maybe working a little more. Is that pic at 28 in.

Mad Max · « **Reply #67 on:** May 15, 2023, 03:53:26 PM »

Yes stic 28"
and yes the recurves are working more

Crooked Stic · « **Reply #68 on:** May 15, 2023, 04:31:23 PM »

Forward taper .001 or .002 ?

BO-R · « **Reply #69 on:** May 15, 2023, 08:04:12 PM »

very nice!

Mad Max · « **Reply #70 on:** May 15, 2023, 08:31:32 PM »

.002 but has a built in power lam

Crooked Stic · « **Reply #71 on:** May 15, 2023, 08:42:41 PM »

Mine is .001 with built in PL about 4 in. Past fades on 20 in. Riser.

Kirkll · « **Reply #72 on:** May 16, 2023, 09:47:54 AM »

Quote from: Crooked Stic on May 15, 2023, 12:04:53 PM

Ok this is all you get. just a twidge over 28. i cant see a lot I would change. What you guys think

I like your red neck tiller tree there Mike.

Decent looking string angle on that thing. Looks like a winner to me.

Your hooks are not opening up much at all, and that’s a good thing…. Are you using tip wedges?

Thanks for the photo… made my whole day.

Crooked Stic · « **Reply #73 on:** May 16, 2023, 10:39:00 AM »

No tip wedge I thought about using one until I used my redneck tiller thingy. Also thinking about one of those fancy tiller trees----not sure where I have room to put it.

Mad Max · « **Reply #74 on:** May 16, 2023, 03:28:16 PM »

[/quote] From Kirk

Your hooks are not opening up much at all, and that’s a good thing

[/quote]

Explain please

Crooked Stic · « **Reply #75 on:** May 16, 2023, 05:56:38 PM »

Some like semi or static tips never quite understood why.

jess stuart · « **Reply #76 on:** May 16, 2023, 06:49:40 PM »

Smoother and quieter in my experience. Statics have become my favorite design.

Kirkll · « **Reply #77 on:** May 17, 2023, 01:37:38 AM »

Quote from: Bryan Adolphe on May 15, 2023, 01:23:46 PM

I think it looks awesome Mike, bending pretty nice for my inexperience eyes!

I’ve been using an auto clear coat for quite a few years now. I found a product that is pretty user friendly, absolutely clear as glass, and holds up real well after it’s cured properly…. That’s the trick…. getting it done, and keep it above 70 degrees for 36 hours before messing with it.

Btw…. This stuff is half the cost of most auto clear coats, and far superior to any epoxy clear coat like Thunderbird … that stuff yellows out with age and is NOT user friendly at all by comparison.

Crooked Stic · « **Reply #78 on:** May 18, 2023, 08:09:31 PM »

the next one has tip overlays glued on and prolly get it strung tomorrow.

Mad Max · « **Reply #79 on:** May 19, 2023, 07:37:51 AM »

What wood is the riser Stic??

News:

Author Topic: One piece recurve. (Read 9221 times)

Users currently browsing this topic: