Author Topic: new osage selfbow (Read 2345 times)

Mad Max · « **Reply #1 on:** July 04, 2023, 04:06:44 PM »

Did you drag out one of your old staves?

How long will the recurve be NTN ?

Pat B · « **Reply #2 on:** July 04, 2023, 04:27:40 PM »

This is the stave I got from Jim at the Classic. I think it's 64" t/t.

Mad Max · « **Reply #3 on:** July 04, 2023, 04:50:18 PM »

Pat B · « **Reply #4 on:** July 05, 2023, 11:54:00 AM »

After the initial tip bending and some tweaking...

Pat B · « **Reply #5 on:** July 10, 2023, 10:59:00 PM »

I've done a little more, getting the tips aligned and reducing the weight. Here's a few pics, unbraced, braced with a tight tiller string and pulled a few inches. You can see the tiller is still off. More to come...

Buemaker · « **Reply #6 on:** July 11, 2023, 06:13:00 AM »

Looking good.

Roy from Pa · « **Reply #7 on:** July 11, 2023, 07:11:06 AM »

Looks nice Pat.

Pat B · « **Reply #8 on:** July 11, 2023, 09:44:33 AM »

Thanks, guys. It's good to get back in to it.

Mad Max · « **Reply #9 on:** July 11, 2023, 05:21:34 PM »

Bryan Adolphe · « **Reply #10 on:** July 11, 2023, 07:35:24 PM »

Looks like it’s coming along very nice!

Pat B · « **Reply #11 on:** July 12, 2023, 09:31:14 AM »

Coming along nicely but been too busy to get back to it lately. Hopefully soon though.

Pat B · « **Reply #12 on:** July 15, 2023, 05:31:06 PM »

I've been heat tweaking some twist and aligning the tips a little lately. Once I made a new string and got her to brace I noticed more lateral misalignment. I'm just going a little at a time.
I'll get the actual measurements but she has a gradual taper to the last 9" then taper to 1/2 tips for now.

Pat B · « **Reply #13 on:** July 15, 2023, 11:49:44 PM »

the bow is 66" n/n, 1 1/2" at the fades, 1 3/8" at mid limb and 1 1/4" at 9" from the tips and tapers to 1/2" tips(for now)

Pat B · « **Reply #14 on:** July 17, 2023, 11:38:04 AM »

I'm having trouble with the lower limb tip wanting to twist laterally. I need to work on that now. The tiller is ok other than that. She's at 47#@26" now.

Mad Max · « **Reply #15 on:** July 17, 2023, 01:37:57 PM »

You will get it

Pat B · « **Reply #16 on:** July 27, 2023, 11:38:09 AM »

Well, it's about time... ;D
Got her all done and she shoots well, is light in the hand and is whisper quiet. She's 65" t/t and pulls just over 44#@26". I didn't add tip overlays and only have side nocks coming around to the belly. The handle wrap and floppy rest is commercial elk hide with mink string silencers. I did a sunburst dye job on the back with medium brown Fiebings leather dye. I've put about 50 arrows through her and like I said she shoots quite well.
Here are a few pics. I'll post a full draw later today...

Bryan Adolphe · « **Reply #17 on:** July 27, 2023, 12:59:03 PM »

Shes a beauty Pat!

Kirkll · « **Reply #18 on:** July 27, 2023, 09:40:07 PM »

That came out nice

....

It Made me go look at my osage stave i chased the rings on 10 years ago... I blew the dust off it, and put it right back on the shelf though.... One of these days...

Pat B · « **Reply #19 on:** July 27, 2023, 10:37:24 PM »

Thanks, Bryan.
Come on Kirk. Get that stave out and release the bow inside it.

News:

Author Topic: new osage selfbow (Read 2345 times)

Users currently browsing this topic: