Author Topic: 2024 Bow Swap Progress Thread - Closed (Read 80469 times)

Crooked Stic · « **Reply #300 on:** February 23, 2024, 05:30:45 PM »

East west north south

Buemaker · « **Reply #301 on:** February 23, 2024, 06:09:56 PM »

Well, my bow is not going to America. When I started to draw it I had a dead even tiller at brace, then drawing further the tiller changed, adjusting and drawing it further it changed again. Kept on like that and by the time I had a perfect tiller at full draw the bow was too light. All three lams Hickory, Purpleheart and Ipe looked perfect, but wood is wood, I suspect the Ipe belly was the culprit. In this case I do not think it would be wise to pike it. The good thing is that I have a light bow I can sell. So back to the drawing board, still have plenty time. Maybe glass this time, we will see. This was Bue’s night report, a tiny bit pi- -ed off.

Mad Max · « **Reply #302 on:** February 23, 2024, 06:31:22 PM »

Quote from: Buemaker on February 23, 2024, 06:09:56 PM

Well, my bow is not going to America. When I started to draw it I had a dead even tiller at brace, then drawing further the tiller changed, adjusting and drawing it further it changed again. Kept on like that and by the time I had a perfect tiller at full draw the bow was too light. All three lams Hickory, Purpleheart and Ipe looked perfect, but wood is wood, I suspect the Ipe belly was the culprit. In this case I do not think it would be wise to pike it. The good thing is that I have a light bow I can sell. So back to the drawing board, still have plenty time. Maybe glass this time, we will see. This was Bue’s night report, a tiny bit pi- -ed off.

Bummer Bue

kennym · « **Reply #303 on:** February 23, 2024, 06:42:03 PM »

Looks awesome Mr Stic. Sure will be happy to get it...

Dang Bue, that always bites!!

Jon Lipovac · « **Reply #304 on:** February 23, 2024, 07:20:34 PM »

Dang it Bue.
Sure is pretty too.

Crooked Stic · « **Reply #305 on:** February 23, 2024, 08:18:15 PM »

You will get er figured out Bue.

N
E. W. KENNY

S

kennym · « **Reply #306 on:** February 23, 2024, 08:26:16 PM »

Mostly west eh???

Kirkll · « **Reply #307 on:** February 23, 2024, 08:46:02 PM »

Quote from: Buemaker on February 23, 2024, 06:09:56 PM

Well, my bow is not going to America. When I started to draw it I had a dead even tiller at brace, then drawing further the tiller changed, adjusting and drawing it further it changed again. Kept on like that and by the time I had a perfect tiller at full draw the bow was too light. All three lams Hickory, Purpleheart and Ipe looked perfect, but wood is wood, I suspect the Ipe belly was the culprit. In this case I do not think it would be wise to pike it. The good thing is that I have a light bow I can sell. So back to the drawing board, still have plenty time. Maybe glass this time, we will see. This was Bue’s night report, a tiny bit pi- -ed off.

Hey! At least it didn't blow up like mine did...

That's what i did... I went back to glass and hit draw weight perfectly this time. But..... Being a fun project, i've got something a little different i threw into the mix this time. but i'm going to wait until i get my horn material and tip overlays completed before i post photos.

but i can say these limbs came out looking pretty "Wild"....... Kirk

Longcruise · « **Reply #308 on:** February 23, 2024, 09:14:37 PM »

The Myrtle donated by Gary Schuler showed up early in the week. Two beautiful pieces of green Myrtle and two pieces of Myrtle burl. The burl really needs to be stabilized and I'm not set up for that. Maybe I can find someone to stabilize it but not at this time.

Here are the two pieces of green Myrtle. I haven't decided which piece yet but either is going to be great. It will contribute nicely to the Hill tradition.

But....I'm making changes that will complicate hitting weight so I'll be doing a test bow first to establish a baseline.

Mo_coon-catcher · « **Reply #309 on:** February 24, 2024, 04:32:56 PM »

I decided to get some work in on the wonky Osage. It’s coming along decently and fairly quickly. I love the really uneven looking brace of this thing. There’s still a good bit of refining to go, but it’s dropping weight to the point I can work on it pretty well.

Kyle

kennym · « **Reply #310 on:** February 24, 2024, 05:27:31 PM »

Last overlay put on , next we make the sight window on one side and the grip for the victims big little hands …

Crooked Stic · « **Reply #311 on:** February 24, 2024, 08:10:03 PM »

That's lookin pretty good. Would not mind having another Kenny bow.

Buemaker · « **Reply #312 on:** February 25, 2024, 05:26:30 AM »

Better start on the second one. I have woods so no problem there. I also have half finished and almost finished bows that can fit my victim.

derekdiruz · « **Reply #313 on:** February 25, 2024, 03:03:06 PM »

Hadn't made much progress the past week or so, as I've been working on a new template sander for my oscillating edge I picked up. Well, got her all set up with a collar and we're back in business. Tomorrow I'll have all of the footing jigs made up for the riser, and I'll be cutting the veneer. Going with quilted kosipo in the limbs.. Pics to come when I have something worthy of a photo in a few days.

Buemaker · « **Reply #314 on:** February 25, 2024, 06:07:09 PM »

I did finish the bow that became too light to go to America. I thought I may show a few pics of it anyway. I do not use varnish or laquer on my all wood bows, but wood oil. I like the look and feel of the wood structure to shine through.