Author Topic: 2024 Bow Swap Progress Thread - Closed (Read 80724 times)

Buemaker · « **Reply #540 on:** March 18, 2024, 04:02:50 PM »

Looking good. Are you routing out the riser?

kennym · « **Reply #541 on:** March 18, 2024, 04:04:03 PM »

Great looking stuff goin on!!

derekdiruz · « **Reply #542 on:** March 18, 2024, 05:11:41 PM »

Bue, yes.

I Cnc the profile of the riser then add the shaping by hand. This allows me to alter grips if I so choose. Then the shelf is cut to exactly .007” past center.

I also use my Cnc to profile the limbs, cut the limb bolt alignment holes, and cut the limb butts. Makes for a quick process after glue up. It’s taken me a years worth of headaches to get here, but I pretty well have my process down.

Kirkll · « **Reply #543 on:** March 18, 2024, 05:18:57 PM »

What types of wood in that one Derek? Cool looking grain in that footing. Kirk

Buemaker · « **Reply #544 on:** March 18, 2024, 05:20:43 PM »

Must be a great help. Would it be possible to show how the limb alignment holes are made? I find this much interesting even if I will never do it myself.

derekdiruz · « **Reply #545 on:** March 18, 2024, 08:29:10 PM »

Bue, I'll post a picture of the jig set up & toolpath running when I do my next limbs. It's definitely fun to watch!

Kirk, That's bacote between myrtle. The woods are a hair lighter in real life than the pic depicts. My shop lighting is bright white LEDs in a dark concrete building. So woods don't look NEAR like they do in daylight.

DVSHUNTER · « **Reply #546 on:** March 18, 2024, 09:52:01 PM »

Abbeys first shot with her new bow.

Crooked Stic · « **Reply #547 on:** March 18, 2024, 09:54:24 PM »

Abby looking good

Mad Max · « **Reply #548 on:** March 18, 2024, 10:47:20 PM »

Quote from: Crooked Stic on March 18, 2024, 09:54:24 PM

Abby looking good

x2

DVSHUNTER · « **Reply #549 on:** March 18, 2024, 11:09:54 PM »

So for those of you still holding your breath for Kirk's bow to end up at your doorstep, go ahead and breathe. This beautiful bow ended up at my doorstep. I had asked for a bow for abbey instead of me and kirk did not disappoint. Thos 64 in slick stick is 30 lbs at her draw and zips her arrows downrange with speed and accuracy. Kirk's attention to detail and finish work is fantastic and the leapord print limbs fit her personality perfect. I was glad the arrows I have for her for so she could shoot it right away. Thank you kirk for an amazing bow.

Buemaker · « **Reply #550 on:** March 19, 2024, 04:10:29 AM »

Hello Abbey, looking sharp.

kennym · « **Reply #551 on:** March 19, 2024, 08:44:45 AM »

Awesome! Looks like she's no stranger to bow shooting!

Kirkll · « **Reply #552 on:** March 19, 2024, 08:59:00 AM »

Excellent! Looks like the slimmed down grip fits her well too. Glad it went over well…. Kirk

derekdiruz · « **Reply #553 on:** March 19, 2024, 02:54:29 PM »

She’ll get sprayed later today for the first coat,2nd and 3rd coat. If I don’t find runs, she’ll ship tomorrow!

Bacote and Myrtle riser with a black back glass overlay, curly maple back and black belly glass. 60” and 40 somethin (vague; so the victim isn’t identifying it lol)

Mad Max · « **Reply #554 on:** March 19, 2024, 03:05:20 PM »

Nice work guy's

kennym · « **Reply #555 on:** March 19, 2024, 03:20:40 PM »

60" and 40 somethin, YEP , send it!

Buemaker · « **Reply #556 on:** March 19, 2024, 04:10:45 PM »

Very nice Derek.

Buemaker · « **Reply #557 on:** March 20, 2024, 07:42:07 AM »

Sanding off sealer coates. Now you see how good or bad you sanded in the first place.

Mad Max · « **Reply #558 on:** March 20, 2024, 07:57:02 AM »

Usually bad bue in my case

OldRawhide42 · « **Reply #559 on:** March 20, 2024, 08:16:17 AM »

Bue what do you use for a sanding sealer ??

News:

Author Topic: 2024 Bow Swap Progress Thread - Closed (Read 80724 times)

Users currently browsing this topic: