Author Topic: VPA users Survey (Read 11856 times)

Terry Green · « **on:** March 11, 2024, 03:49:34 PM »

For those those of you that use VPA 3 blades, what exact head to you use most? Please include weight and cut width.

I know the Arkansas Mafia's, PDK's and KAZ's

Also, do any of you use the Small Game Thumper?

Thanks in advance.....

Wudstix · « **Reply #1 on:** March 11, 2024, 03:55:23 PM »

I usually shoot 1 1/4' 250 gr. 1 1/8' 190/200 is next. When I'm not shooting Snuffer. All glue on.

Dave Pagel · « **Reply #2 on:** March 11, 2024, 04:10:00 PM »

175 grain screw-in for aluminums, 200 grain screw-in for carbons and 160 grain glue-on for woodies. All 1 1/8.

D.P.

Trenton G. · « **Reply #3 on:** March 11, 2024, 04:16:50 PM »

200 grain screw in, 1 1/4 inch cut on a carbon shaft.

Mike Bolin · « **Reply #4 on:** March 11, 2024, 05:41:47 PM »

1 1/8" 250 grain screw in 3- blade on Easton 6.5 carbons. Only broadhead I've used since around 2010. Great head, great customer service!

Magilla · « **Reply #5 on:** March 11, 2024, 07:10:34 PM »

1 1/8” 3 blade 175 grain screw in

Herdbull · « **Reply #6 on:** March 11, 2024, 07:20:18 PM »

On 2219 I use 1 1/8 inch 250gr screw in. For wood arrows 1 1/8 inch190 gr or 250gr glue on. I don't see the 250 glue-on on site though.

For black bear I use 1 1/4 250 screw in.

Bullchaser1 · « **Reply #7 on:** March 11, 2024, 08:58:26 PM »

Been shooting the 125 grain non vented 1 1/8” for years. My go to head for deer/ bear/ elk. I sharpen them on a 6” pvc pipe with sand paper. Awesome heads

Possum Head · « **Reply #8 on:** March 11, 2024, 09:16:11 PM »

As far as Broad heads I’ve only used the 2 blade Penetrators. The Thumpers are sweet for Bullfrogs. The shock helps put em down quick!

meathead · « **Reply #9 on:** March 11, 2024, 09:36:15 PM »

When I’m shooting 3 blades it’s the 160 gr. glue on. I use the thumpers a lot too just for stumping.

Wudstix · « **Reply #10 on:** March 11, 2024, 11:19:38 PM »

Don't see the 250 grain 1 1/4" glue on either. Must not be a market for them.

SS Snuffer · « **Reply #11 on:** March 12, 2024, 09:52:32 AM »

1 1/8 175 gr. for better penetration

Wudstix · « **Reply #12 on:** March 12, 2024, 12:21:15 PM »

Just got confirmation from VPA that 250 grain glue on heads are no more. Be careful with the ones you have. Even the 250 gr SGT are discontinued.

Kelly · « **Reply #13 on:** March 12, 2024, 02:48:47 PM »

I use the glue on 3 blade heads in 160, 190, and 250 grain on wood carbon or aluminum. The latter two will have screw in broadhead adapters applied in either aluminum or steel depending upon setup.

Yes, first year using the Thumpers.

frassettor · « **Reply #14 on:** March 12, 2024, 03:54:33 PM »

I use the 250 gr 1 1/4”. I also use the SGT .

cacciatore · « **Reply #15 on:** March 12, 2024, 04:27:17 PM »

When I use a 3 blade is the VPA 250 grs 1-1/4. My arrows are mostly FMJ.

Friend · « **Reply #16 on:** March 12, 2024, 09:34:16 PM »

250 gn 1 1/4" three blade followed by a 100 gn insert....

ESP · « **Reply #17 on:** March 14, 2024, 09:53:04 PM »

300 grain 1 1/4 and 1 1/2.

Wudstix · « **Reply #18 on:** March 18, 2024, 12:36:23 AM »

Really disappointed in the reduced glue-on options available.

m&m · « **Reply #19 on:** March 18, 2024, 08:17:09 AM »

200 gr. 1 1/4 cut


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: VPA users Survey (Read 11856 times)

Users currently browsing this topic: