3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: attaching a Kwikee Kwiver  (Read 1236 times)

Offline Lee Lobbestael

  • Trad Bowhunter
  • **
  • Posts: 489
attaching a Kwikee Kwiver
« on: July 31, 2024, 10:11:23 AM »
Has anyone attached a kwikee kwiver  mounting bracket to a bow using gorilla mounting tape? I dont want to tap my bow but would like to try a kwikee kwiver.
Thanks

Online Tim Finley

  • Trad Bowhunter
  • **
  • Posts: 1031
Re: attaching a Kwikee Kwiver
« Reply #1 on: July 31, 2024, 10:45:40 AM »
Wont hold .

Online Terry Green

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 28708
Re: attaching a Kwikee Kwiver
« Reply #2 on: July 31, 2024, 11:12:42 AM »
You might try wrapping the spine with tennis racket wrap. Its tacky so it might not slip and move at all as you apply it with tension. I would wrap the Spine where you are going to wrap it to the bow 1st and then wrap the spine and the bow both together 2nd.
Tradbowhunting Video Store - https://digitalstore.tradgang.com/

Tradgang Bowhunting Merchandise - https://tradgang.creator-spring.com/?

Tradgang DVD - https://www.tradgang.com/tgstore/index.html

"It's important,  when going after a goal, to never lose sight of the integrity of the journey" - Andy Garcia

'An anchor point is not a destination, its  an evolution to conclusion'

Online Trenton G.

  • Trad Bowhunter
  • **
  • Posts: 1496
Re: attaching a Kwikee Kwiver
« Reply #3 on: July 31, 2024, 03:50:37 PM »
Hockey tape might work pretty well. It holds up in some pretty nasty conditions.

Online stevem

  • Trad Bowhunter
  • **
  • Posts: 516
Re: attaching a Kwikee Kwiver
« Reply #4 on: July 31, 2024, 05:59:43 PM »
I mounted mine on a 4 inch long piece of 3/4 " by 3/4" aluminum angle.  Then cut off one side of the angle at ends.  Easy then to tape to bow.  Can send pic if you pm me a phone no.
"What was big was not the fish, but the chance.  What was full was not the creel, but the memory" - Aldo Leopold   "Good judgement comes from experience, and a lot of that comes from bad judgement"- Will Rogers

Offline arrow30

  • Tradbowhunter
  • Trad Bowhunter
  • *
  • Posts: 235
Re: attaching a Kwikee Kwiver
« Reply #5 on: July 31, 2024, 07:25:35 PM »
maybe some flex tape would work, i think its double sided.
original register date- jan. 2010

Offline Razorbak

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 819
Re: attaching a Kwikee Kwiver
« Reply #6 on: July 31, 2024, 11:48:49 PM »
3rivers sells a bracket that tapes to your riser with hvy duty 3 m tape and you can screw quiver in to the bracket. Problem solved
TGMM Family of the Bow

Online Bow man

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 3026
Compton Life Member
PBS QRM

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: attaching a Kwikee Kwiver
« Reply #8 on: August 01, 2024, 09:52:22 AM »
Unless you necessarily wanted to mount the KK to your bow what I did was added a para cord strap to the KK and added a KK quick disconnect to my tree stand at a place where it was convenient to retrieve arrows when needed.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Online Terry Green

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 28708
Tradbowhunting Video Store - https://digitalstore.tradgang.com/

Tradgang Bowhunting Merchandise - https://tradgang.creator-spring.com/?

Tradgang DVD - https://www.tradgang.com/tgstore/index.html

"It's important,  when going after a goal, to never lose sight of the integrity of the journey" - Andy Garcia

'An anchor point is not a destination, its  an evolution to conclusion'

Offline Lee Lobbestael

  • Trad Bowhunter
  • **
  • Posts: 489
Re: attaching a Kwikee Kwiver
« Reply #10 on: August 01, 2024, 01:15:59 PM »
Thanks guys, Not sure I want to wrap tape around my riser tho. No biggie tho I'll probably stick to the more expensive quivers meant for trad bows

Online Charlie Lamb

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 8251
Re: attaching a Kwikee Kwiver
« Reply #11 on: August 01, 2024, 05:48:27 PM »
If you end up using tape be sure and wax the riser or at least where the tape will be. This will help protect the bow and it's finish. :thumbsup:
Hunt Sharp

Charlie

Offline frank bullitt

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2428
Re: attaching a Kwikee Kwiver
« Reply #12 on: August 04, 2024, 02:50:52 PM »
The Bow Wart from 3 Rivers works great.
My son has a 60s Bear Grizzly that has an AMS Bowfishing retriever attached.
Been using it for 3 summers now!
Also you could wrap with surgical tubing or the flat latex, exercise bands. I have a homemade bowfishing reel attached this way.
Wrap just like I attached my slingshot band to natural forked frames.
Have a great day!

Offline Lee Lobbestael

  • Trad Bowhunter
  • **
  • Posts: 489
Re: attaching a Kwikee Kwiver
« Reply #13 on: August 05, 2024, 05:27:17 AM »
I don't know how I missed the link to the bow wart. That is exactly what i'm looking for. I ordered one.
Thanks guys

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©