Arrow Dynamic Traditional w/ACC - G-Nock "?"

[Bowhunter4life]

Which groove, large or small, on a G-Nock for a 14 strand TS1+ string with a .022 Brownell Polyester serving?  

(AD Traditional Heavy with ACC 28 bushing and G-Nock)

I'm guessing large... but have never seen a G-Nock in person.

Thanks in advance...

[Chris Surtees]

I would go with the large.

[Bowhunter4life]

I went with large, hopefully they work out well...

[John Havard]

Hey Jeff,

I'm pretty sure you will wish you had gotten the small.  Our 12-strand DF-97 string with .022 serving fits the small throated nock very well.  My guess (without having a 14-strand TS-1 string appropriately served) is that it's very close to the same finished diameter as our strings.  The large throat G-nock may be a little sloppy on your serving.  I shoot a fair amount with ACC 3-71's and like the smaller nock.

[Shawn Leonard]

I was thinking the smaller one and if a tad too tight just use a small file and a couple light touches to the inside of each nock will put ya very good. I use a 12 strand D-97 with .024 and need to do just that with the small ones, the large are as John said a bit sloppy. Shawn

[Bowhunter4life]

Well I'm trying to get the order switched before it gets out the door.  Hopefully...

Thanks for the info!

[Chris Surtees]

[Danny Rowan]

Jeff,

Why not just order the adaptors and use 5/16 glue on bhoning classics. You can get them from Raptor Archery.

Danny

[JRY309]

I shoot the large groove G-nocks on my AD Trads with 12 strands of D97 with .024 Halo,they fit perfect.I cut the nock adapters at the groove closet to the shaft,ACC 3-28 bushings will fit the AD shafts also.

[Bowhunter4life]

Danny: I don't like glue on nocks...

Now it sounds like both the large and small groove works...  I guess I'll find out in a few days...